Cell Phone Manufacturer/ Distributor: Buy Wilson-841262 but please make sure it is compatible with your mobile phone model as listed or operates between the frequencies posted at your phone manufacturer or service Carrier's website (Cellular/ GSM/ PCS) and/or in its operating manual.
For Cell Phone Model: Wilson 841262 is made/ distributed by Wilson Electronics, a leader in reception boosting antennas, amplifiers, and related parts and accessories.
UPC Code: 813986009581
Cell Phone Category: Product code Wilson841262 is from Wilson Electronics. Why do we carry WilsonElectronics products? We carry them because Wilson signal booster products work! They increase cellphone reception bars reducing dropped calls, static, and promote clearer wireless conversations.
Wilson 841263 has now been upgraded to the new FCC Certified USA version, Wilson 462205. If you need this item for installation and operation in United States, you must purchase Wilson DB Pro with Uni Directional Yagi Antenna Part # 462205, instead. Thank you.
Wilson 841263 KIT-DB Pro 800/1900 MHz 62 dB Signal Boost Amplifier Kit (Includes: 801262, 301155, 304475, 901123 plus 20', 30' & 50 FT lengths of RG6 Cable) - Dual Band Cellular/PCS (800/1900 MHz) Wireless (WILSON WIRELESS BUILDING AMPLIFIERS).
Wilson 841263 is the manufacturer part number. SIGNALBOOST™ DB Pro cellular amplifier kit significantly improves the performance of any cellular device on any network (except Nextel*) experiencing weak signal inside of buildings. Installation simplicity without sacrificing performance highlights this product. At the center of this kit is the DB Pro dual band amplifier with a new high gain design. An external Wide Band Directional Antenna with multiple mounting options eliminates researching cell site locations and antenna pointing. The inside panel antenna which rebroadcasts the amplified signal is designed for optional in-wall mounting. All components are interconnected using provided standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs. Wilson Cellular's new SignalBoost 62 dB DB PRO 801262 Cellular/PCS Amplifier works with all cell phones and laptop data cards except iDEN, Nextel and 1700MHz AWS (T-Mobile US 3G).
Improve cell phone and data card performance in your home or office - anywhere you need a stronger signal indoors! Works with all cell phones except iDEN/Nextel and 1700MHz AWS (T-Mobile US 3G). Covers up to 15 ft away from unit. Works with all US cellular and PCS carriers. Oscillation protection. Extends cell phone battery life. Comes with everything you need - plug and play. Made in the USA. Up to 10 times more powerful than your cell phone.
The 841263 kit includes:
Wilson Cellular's new SignalBoost 62 dB DB PRO 801262 Cellular/PCS Amplifier
Wilson's Wide Band Directional Antenna, 75 Ohm. (304475)
Internal Panel Antenna (301155)
20', 30', and 50' lengths of RG-6 cable
Works on all generations of CDMA, TDMA and GSM
For 800MHz (850MHz) Cellular and 1900MHz PCS bands
Supports multiple phones, data cards simultaneously
Attractive, sleek design
Automatic overload/oscillation protection
All mounting hardware
AC power supply
Wilson 801263 Specifications:
Receiver sensitivity -108dBm, CDMA FER 1/2%
Up to 2 watts power amplifier
FCC and IC type accepted
Part Number 801263
Frequency 824-894MHz, 1850-1990MHz
Gain 60dB / 60dB (65 dB Maximum)
Power Output 33.2 dBm (800 MHz) 34.0 dBm (1900 MHz)
Impedance 75 Ohms
Noise Figure 3.5dB Nominal
Isolation > 90dB
Power Requirements 110-240 V AC, 50-60 Hz, 8 W
Connectors F/Female (inside antenna)
F/Female (outside antenna)
Dimensions 6.2" x 4.2" x 1.5"
|For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.|
Regarding weBoost, Wilson Pro, and zBoost Amplifiers:
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.
In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.
Please type your cell phone model in the search box at the top to view all available accessories for your phone model
Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.
Copyright Cell-Phone-Accessories.com | HTML Index