Weboost signal booster connect 3g omni ( ... - Click to enlarge.
Weboost signal booster connect 3g omni ( ... - Click to enlarge.

Weboost signal booster connect 3g omni

Weboost signal booster connect 3g o ... - Larger item photo here.
Availability: Usually ships the same business day

Weboost signal booster connect 3g omni (we-boost 472105 connect 3-g omni)

472105Retail MSRP: $399.99Our Price with FREE Bluetooth Headset: $399.99


We will MATCH or BEAT lowest price offered on most cellular accessories.

Weboost signal booster connect 3g omni (we-boost 472105 connect 3-g omni). 3G boost for an entire home, for up to 5000 square feet. Enhances talk, text, and basic Internet on all carrier cellular phones.

The following parts made by the brand we-boost (AKA Wilson Electronics) in United States are included in this complete weBoost signal booster kit:

weBoost 472005 Connect 3G Dual-band Cell Phone Amplifier/ Repeater

weBoost 311155 Inside Wall Panel Antenna

weBoost 311201 Outside Omni-directional Antenna

weBoost 859912 Power Supply

weBoost 950630 (quantity two) 30' White Low Loss RG6 (75ohm) Coax Cable.

This Wilson Electronics / weBoost signal booster kit is compatible with following USA and Canada service Carriers:
  • AT&T Wireless
  • Bell Mobility
  • Boost Mobile
  • Chatr
  • C Spire
  • Fido
  • Cricket Wireless
  • Ice Wireless
  • Metro PCS
  • Koodo Mobile
  • Net10
  • nTelos
  • Shentel
  • Mobilicity
  • Simple Mobile
  • MTS
  • Sprint
  • NorthernTel
  • Straight Talk
  • Public Mobile
  • T-Mobile USA
  • Rogers Wireless
  • Ting
  • SaskTel
  • TracPhone
  • Telus Mobility
  • US Cellular
  • Videotron
  • Verizon Wireless
  • Virgin Mobile Canada
  • Virgin Mobile USA
  • Wind Mobile

Connect 3G™
Cellular Signal Booster
with Omni Antenna
Installation Instructions for the Following weBoost Signal Booster:

Connect 3G Adjustable Gain In-Building Wireless 800/1900 MHz SmarTech   ™ Signal Booster
Model # 472005   FCC ID: PWO460005    IC: 4726A-460005

The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
Package Contents    3
Before Getting Started    3
Find the Strongest Signal    3
Installation Details    4
Quick Install    5
Outside Antenna Installation    5
Signal Booster Installation    6
Inside Antenna Installation    6
Powering Up the Signal Booster    6
Troubleshooting & Understanding Lights    7
Additional FAQ    8
Safety Guidelines    10
Signal Booster Specifications    11
Guarantee and Warranty    12

2    Need help?        Customer Support  866-294-1660
Package Contents

AC Power Supply 6V / 2.5A
(Not included with some models)
Wall Mount Bracket    Omni Antenna Mount Bracket
Tools Required for Installation:
(depending on your particular installation, you will need the following tools)
Pole mount - 10 mm open-end wrench or adjustable wrench
Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver

Before Getting Started
Before you install your Connect 3G and start enjoying improved cellular reception in your facility, please do the following:
Read through all the installation steps. This will help you know what to expect from start to finish.
Familiarize yourself with all materials in your product package. This will allow you to know which pieces are referenced in the instructions.
Identify the location of your best available cellular signal. See instructions that follow.
Determine the best installation locations for your Outside Antenna, Signal Boost, and Inside Antenna. Test the function of your Connect 3G system before finalizing installation.
Find the Strongest Cellular Signal
Before you install your Connect 3G signal booster, you must determine the location of the best available cellular signal. This will affect the location of your Outside Antenna and will help you get the best performance from your Connect 3G. You can fi    the strongest signal outside your building, typically at the highest point available, using any of the following methods:
Best method:
Connect the Outside Antenna to the Connect 3G signal booster, and the Connect 3G to the Inside Antenna. Have one person outside (on the roof for best results) move the Outside Antenna with a second person inside the building near the Inside Antenna watching the signal strength on a phone. This allows you to read the signal strength from nearby cell towers.
The person inside should have the phone in test mode so the numerical signal strength can be read. This
is more accurate than the bar indicator. The person on the roof should move the Outside Antenna. Allow           30 seconds for the phone to register with each location.

Outside Omni Antenna

Cell Tower

The person inside should note the readings on the phone with each placement. Signal readings usually appear as a negative number. The closer the number gets to zero, the stronger the signal (for example,
-86 dB would be a moderately good reading while -55 dB would be an excellent reading, and -110 dB would be a weak, or unusable signal).

Outside Omni
Antenna Cell Tower

Once you have determined which location provides the strongest outside signal, you can install the Outside Antenna in that general location.
Good methods:
Place calls from several locations outside your building. As you move to different locations, note where you get the best reception.
If you have a smart phone, you can download apps that help you identify locations of cell phone towers or
the strongest signal. Go to the App Store and search for “cell signal” to find available apps for your device.

and note where the signal appears the strongest. (Note: cell phone bars are only an approximation of signal strength and vary from phone to phone.) Phones can take up to 30 seconds to reset to a new reading. Be patient and repeat your signal check several times.
Installation Details
As you plan your installation, keep the following guidelines in mind to maximize your signal strength:
Maintain a vertical distance of at least 20 feet or a horizontal distance of at least 50 feet between the Outside Antenna to the Inside Antenna.
If possible, place the Inside Antenna directly beneath the placement of the Outside Antenna location. This creates a maximized signal zone within the room where the Inside Antenna is located.
Outside Omni Antenna

Place the inside antenna directly beneath the placement of the Outside Antenna location
At least 20 feet of vertical or 50 horizontal separation

Inside Panel Antenna
Acceptable method: Check the bar indicator on your cell phone display
Be sure the Inside Antenna is NOT
facing toward the Outside Antenna. This creates potential oscillation
4    Need help?        Customer Support  866-294-1660
or feedback and reduces the effectiveness of the Connect 3G.
If you do not know how to mount hardware or run coax cable through walls, ceilings and floors, get help from a weBoost Installer that is a qualified contractor or electrician.
We recommend you install the Lightning Surge Protector (859992). Attach the cable from the Outside Omni Antenna to the surge protector and ground the surge
protector. The LSP is sold separately (refer to page 11 for more info.
Quick Install
NOTE: Create a “soft” install first by testing components in your proposed locations before securing them with hardware.
Select a location on the roof of the building to install the Outside Antenna. Make sure the antenna is clear of obstructions that could block the signal from the nearest cellular tower.
Select a location to install the Signal Booster that is well ventilated and away from excessive heat, moisture, and direct sunlight.
Select a location for the Inside Antenna that is in the center of the area where the signal needs to be amplified and a minimum of 20 vertical feet or 50 horizontal feet from the Outside Antenna.

Run the coax cable from the Outside Antenna to the Signal Booster and attach it to the connector labeled “Outside Antenna.” Connect
another coax cable to the connector labeled “Inside Antenna” and run it to the Inside Antenna. NOTE: Be careful not to bend the center pins on the connectors when securing connections.
Once you have ensured all connections are tight, connect the Signal Booster to a surge protected power strip with at least a 1000 Joule rating to protect your equipment from power surges and lightning strikes (refer to page 11 for information on lightning protection).
If your Connect 3G is working correctly, the lights will be green. If the lights are orange or red, see the “Troubleshooting” section starting on page 7.
Outside Antenna Installation
Select a location on the roof or an outside wall where the Outside Antenna can be mounted without obstruction (at least three feet of clearance in all directions) and with at least 20 feet of vertical or 50 feet of horizontal separation from the Internal Antenna.

After connecting the coax cable to the antenna, run it underneath the down side of your roof’s fl    if mounted on the roof. Tip: Often you can follow the route used by satellite TV cables. If you attach the Outside Antenna to a wall, run the cable along the outside of the wall to the area where you want the cable to appear on the inside of the building, then drill a hole through the wall where the cable will enter the building. Caution: Before drilling holes for the cable, be sure there are no electrical outlets, wiring, or sewer or water pipes you could puncture or sever.
Seal any holes with silicone, cable bushings or other waterproof sealant.
Need help?        Customer Support 866-294-1660    5
Signal Booster Installation
Select a location for the Signal Booster that is away from excessive heat, direct sunlight, moisture and well ventilated. The enclosure must NOT be air tight. Also, be sure the location is near a power source.

Face inside antenna away from the outside antenna.
Inside Antenna
Connect the coax cables to the Signal Booster from the Outside Antenna and Inside Antenna at the designated ports.
Do NOT connect the Signal Booster to the power source until all cables are connected.
Inside Antenna Installation
Select a location in the center of the area where you want cellular signals improved to mount the Inside Antenna. If you have multiple rooms with poor signal, you may need multiple Inside Antennas. These can attach to the Signal Boost by using a splitter (sold separately). Contact weBoost for more information.
Ensure a minimum of 20 feet vertical or 50 horizontal feet separation from the Outside Antenna.
Outside Omni Antenna

Place the inside antenna directly beneath the placement of the Outside Antenna location
At least 20 feet of vertical or 50 horizontal separation
Use the mounting hardware included
in the package to secure the Inside Antenna to the selected location.
Powering Up The Signal Booster
Ensure the cables to both the Outside Antenna and Inside Antenna are securely connected before powering up the Signal Booster.
Plug the power supply into the Signal Booster input marked “POWER” and then into a surge protector power strip with a minimum 1000 Joule rating.
The lights on the Signal Booster should remain green . If the lights are red or orange, see the
“Troubleshooting” section on page 7.
If you know that only one frequency band (800 MHz or 1900 MHz)  is available in your coverage area, reduce the gain control on the frequency band that is NOT in use to the lowest setting. This will reduce power consumption of the Signal Booster.

Inside Panel Antenna
3.    Inside Antennas can be mounted above ceiling drywall, on a ceiling inside a room, or on a wall inside a room. Ensure the Inside Antenna is facing AWAY from the Outside Antenna to avoid oscillation (feedback).
6    Need help?        Customer Support  866-294-1660
Troubleshooting & Understanding Lights
The Signal Boost includes four indicator lights, one for each band (see FAQ for explanation of MHz bands). Each indicator light will either be green, orange or red.
Band 5
Band 2

Green indicates that the booster is powered and operating at maximum gain.
Solid Red indicates that the booster has shut off on the associated frequencies to prevent oscillation (feedback).
Solid Orange indicates that the booster has shut off on the associated frequencies due to close proximity of a cell tower.
Green/Orange Blinking indicates  that the booster is operating at a reduced gain due to close proximity of a cell tower.
Green/Red Blinking indicates that the booster is operating at a reduced gain to prevent oscillation (feedback).
Note: All red light issues must be resolved before orange light issues.
Fixing Red Light Issues
If one or more lights on the Signal Boost are red:
Make sure all connections are tight.
Increase the distance between the outside antenna and the inside antenna, by moving them horizontally and/or vertically farther apart until the light(s) change to green.
Follow the same steps for a green/red blinking light until the light goes solid green.
If more separation is not possible and the coverage of the booster is too small with a green/red blinking light indicating reduced gain, contact weBoost Customer Support Team for assistance: 866-294-1660.
Fixing Orange Light Issues
If one or more lights on the Signal Booster are orange:
Move the Outside Antenna away from the strongest cellular signal in small increments until the light turns green or green/orange blinking.
Move the outside antenna away from the strongest cellular signal in small increments

If the light remains orange, or if the green/orange blinking light indicating reduced gain is not providing enough coverage area, contact the   weBoost Customer Support Team for assistance: 866-294-1660.
Lights Off
If one or more of the lights on the Signal Booster are off verify power to your surge protected power strip.
NOTE: The Signal Booster can be reset by disconnecting and reconnecting the power supply.
Need help?        Customer Support 866-294-1660    7
Additional FAQ:
What hours can I contact customer support?
Customer Support can be reached from 7:00am to 6:00pm MST, by calling (866- 294-1660).
How does weather affect the performance of my Outside Antenna?
Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective filter to cellular signal.  In times of heavy precipitation, you may see less performance.
What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know which MHz band my cell phone uses?
The Connect 3G works with all major North American cellular providers on the 800 & 1900 MHz frequencies.
Traditionally, 800/1900MHz are associated with voice and 3G data; while 700MHz and 1700/2100MHz are associated
with 4G data.
Inside Antenna Expansion Kit

Kit 309900-50N
2 - Wall Panel antennas
1 - 50 ohm 3-Way Splitter Kit 309905-50N
3 - Wall Panel Antennas
3 - 2-Way 50 Ohm Splitters Kit 309902-75F
2 - Wall Panel Antennas
1 - 3-Way 75Ohm Splitter
Kit 309903-75F
3 - Wall Panel Antennas
3 - 2-Way 75Ohm Splitters Kit 309904-75F
1 - Wall Panel Antenna
1 - 2-Way 75 Ohm Splitter

Inside Antenna Kits

Kit 301121-40010
50 Ohm Dome Antenna
• 10’ Wilson 400
Kit 311135-40060
50 Ohm Wall Panel Antenna
• 60’ Wilson400
Kit 301151-0610
75 Ohm Dome Antenna
10’ RG6 Cable Kit 311135-5820
50 Ohm Wall mount Panel Antenna
20’ RG58 Cable Kit 311155-40060
50 Ohm Wall Mount Panel Antenna
60’ Wilson400 Cable Kit 301151-1110
75 Ohm Dome Antenna
10’ RG11 cable Kit 311155-1150
75 Ohm Wall mount Panel Antenna
50’ RG11 Cable Kit 301211
Desktop Antenna w/ 5’ RG174
8    Need help?        Customer Support  866-294-1660
50 Ohm Outside Antenna Kits

Kit 314453-5825
50 Ohm Pole Mount Panel Antenna
25’ RG58 Cable Kit 314411-5825
50 Ohm Wide Band Directional
25’ RG58 Cable Kit 301111-5850
Yagi Directional Antenna
50’ RG58 Cable Kit 311129-5840
8000 MHz Yagi Directional
40’ RG58 Cable Kit 311203-5820
Omni-Directional antenna
20’ RG58 Cable Kit 311124-5830
1900 MHz Yagi Antenna
30’ RG58 Cable Kit 311203-40020
Omni-Directional antenna
20’ Wilson400 Cable Kit 301111-400170
Yagi Directional w/ N-Female
• 170’ Wilson400
Kit 311124-400100
1900 MHz Yagi Directional
100’ Wilson400 Cable Kit 311129-400100
800 MHz Yagi Antenna
100’ Wilson400 Cable Kit 314411-40075
50 Ohm Wide Band Directional Antenna
75’ Wilson 400 Cable Kit 314453-40075
50 Ohm Pole Mount Panel Antenna
75’ Wilson400 Cable Mini-Mag
• 301126 w/ 12.5 RG174 cable- SMA
75 Ohm Outside Antenna Kits

Kit 301111-0675
Yagi Directional Antenna
75’ RG6 Cable
N-Male to F-Female adapter

Kit 311201-0620
Omni Antenna w/ F-Female
20’ RG6 Cable Kit 311129-0660
800 MHz Yagi Directional
60’ RG6 Cable
N-Male to F-Female adapter Kit 311129-0650
1900 MHz Yagi Directional
50’ RG6 Cable
N-Male to F-Female adapter Kit 314473-0640
75 Ohm Pole Mount Panel Antenna
40’ RG6 Cable Kit 311141-0620
75 Ohm Grey Brick Antenna
20’ RG6 Cable Kit 301111-11140
Yagi Directional Antenna
140’ RG11 Cable
N-Male to F-Female adapter Kit 311201-1120
Omni Directional w/ F-Female
20’ RG11 Cable Kit 311129-11110
800 MHz Yagi Directional
110’ RG11 Cable
N-Male to F-Female adapter Kit 311124-1180
1900 MHz Yagi Directional
80’ RG11 Cable
N-Male to F-Female adapter Kit 314473-1175
75 Ohm Pole Mount Panel Antenna
75’ RG11 Cable Kit 314475-0630
75 Ohm Wide Band Directional
30’ RG6 Cable Kit 314475-1175
75 Ohm Wide Band Directional
75’ RG11 Cable Kit 311141-1120
75 Ohm Grey Brick Antenna
20’ RG11 Cable
Need help?        Customer Support 866-294-1660    9
Safety Guidelines

WARNING:     To uphold compliance with network protection standards, all active cellular devices must maintain at least 6 feet of separation distance from Panel and Dome antennas and 4 feet of separation distance from desktop antennas.
WARNING:     Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone.
WARNING:     Use only the power supply provided in this package. Use of a non-weBoost product may damage your equipment.
WARNING:     The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in excess of that range.
WARNING:     Take care to ensure that neither you nor the pole comes near any power lines during installation.

RF SAFETY WARNING:  Any antenna used with this device must be located at least 8 inches from all persons.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.

For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.

Regarding weBoost, Wilson Pro, and zBoost Amplifiers:

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.

Please type your cell phone model in the search box at the top to view all available accessories for your phone model

Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.

Copyright | HTML Index

BBB Member

Best Service

Authorized Cell Phone Signal Booster Retailer

Cell Phone Signal Booster

Car Charger
Cell Phone Batteries