Search 

Weboost signal booster connect 4g-x (we- ... - Click to enlarge.
Weboost signal booster connect 4g-x (we- ... - Click to enlarge.

Weboost signal booster connect 4g-x


Weboost signal booster connect 4g-x ... - Larger item photo here.
Availability: Usually ships the same business day

Weboost signal booster connect 4g-x (we-boost 471104 connect 4gx)

471104Retail MSRP: $899.99Our Price with FREE Bluetooth Headset: $899.99

Quantity:

We will MATCH or BEAT lowest price offered on most cellular accessories.

Weboost signal booster connect 4g-x (we-boost 471104 connect 4gx). 3G & 4G boost for very large areas, up to 10,000 square feet. Enhances talk, text, and high-speed Internet on all carrier cell-phones.

The following parts made by the brand we-boost (AKA Wilson Electronics) in U.S.A. are included in this complete weBoost signal booster kit:

weBoost 470004 Connect 4G-X 5-band Cell Phone Amplifier/ Repeater

weBoost 311135 Inside Wall Panel Antenna

weBoost 314411 Outside Directional Antenna

weBoost 952360 Power Supply

weBoost 952360 + weBoost 952375 60' + 75' Black 400 Ultra Low Loss Cable (50 ohm).

This Wilson Electronics / weBoost signal booster kit is compatible with following USA and Canada service Carriers:
  • AT&T Wireless
  • Bell Mobility
  • Boost Mobile
  • Chatr
  • C Spire
  • Fido
  • Cricket Wireless
  • Ice Wireless
  • Metro PCS
  • Koodo Mobile
  • Net10
  • nTelos
  • Shentel
  • Mobilicity
  • Simple Mobile
  • MTS
  • Sprint
  • NorthernTel
  • Straight Talk
  • Public Mobile
  • T-Mobile USA
  • Rogers Wireless
  • Ting
  • SaskTel
  • TracPhone
  • Telus Mobility
  • US Cellular
  • Videotron
  • Verizon Wireless
  • Virgin Mobile Canada
  • Virgin Mobile USA
  • Wind Mobile


Connect 4G-X
Cellular Signal Booster



Installation Instructions for the Following Wilson Electronics Signal Booster:

Connect4G-X™ In-Building Wireless Band 12/17 & 13 (700 MHz), Band 5 (800 MHz), Band 4 (1700/2100 MHz), Band 25/2 (1900 MHz)
SmarTech   ® Signal Booster
Model # 471004   FCC ID: PWO460004   IC: 4726A-460004

The term "IC" before the radio certifi    number only signifi s that Industry Canada technical specifi    were met.




Contents
Package Contents    3
Before Getting Started    3
Find the Strongest Signal    3
Installation Details    4
Quick Install    5
Outside Antenna Installation    5
Signal Booster Installation    5
Inside Antenna Installation    6
Powering Up the Signal Booster    6
Troubleshooting & Understanding Lights    6
Additional FAQ    7
Optional Equipment    8
Safety Guidelines    10
Signal Booster Specifications    11
Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Package Contents






60’ Wilson Cable
(952360)

75’ Wilson Cable
(952375)

Connect 4G-X™ (461104)
12V / 3A, AC/DC Power Supply (859900)
Panel Antenna
(311135-40060)
Wide Band Directional Antenna
(314411-40075)

Appearance of device and accessories may vary.

     
Pole Mount Bracket
Wall Mount Bracket

Tools Required for Installation:
(depending on your particular installation, you will need the following tools)
Pole mount - 10 mm open-end wrench or adjustable wrench
Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver


Before Getting Started
Before you install your Connect 4G-X and start enjoying improved cellular reception in your facility, please do the following:
Read through all the installation steps. This will help you know what to expect from start to finish.
Familiarize yourself with all materials in your product package. This will allow you to know which pieces we reference in the instructions.
Identify the location of your best available cellular signal. See instructions that follow.
Determine the best installation locations for your Outside Antenna, Signal Boost, and Inside Antenna. Connect all cables and test the function of your Connect 4G-X system before finalizing installation.
Find the Strongest Cellular Signal
Before you install your Connect 4G-X signal booster, you must determine the location of the best available cellular signal. This will affect the location of your Outside Antenna and will help you get the best performance from your Connect 4G-X. You can fi
the strongest signal outside your building, typically at the highest point available, using any of the following methods:
Best method:
After connecting power the power supply to your surge protected power strip, connect the Outside Antenna
to the Connect 4G-X signal booster, and the Connect 4G-X to the Inside Antenna. Have one person outside (on the roof for best results) rotate the
Outside Antenna with a second person inside the building near the Inside Antenna watching the signal strength on a phone. This allows you to read the signal strength from nearby cell towers.
The person inside should have the phone in test mode so the numerical signal strength can be read. This is more accurate than the bar indicator. Go to



The person on the roof should turn the Outside Antenna 45 degrees
at a time. Allow 30 seconds for the phone to register with each turn.

Cell Tower



Outside Directional
Antenna




The person inside should note the readings on the phone with each turn. Signal readings usually appear as a negative number. The closer the number gets to zero, the stronger the signal (for example, -86 dB would be a moderately good reading while -55 dB would be an excellent reading, and -110 dB would be a weak, or unusable signal).


Outside Directional
Antenna




Cell Tower


Once you have determined which direction provides the strongest outside signal, you can install the Outside Antenna in that general direction.
Good methods:
Place calls from several locations outside your building. As you move to different locations, note where you get the best reception.
If you have a smart phone, you can download apps that help you identify locations of cell phone towers or the strongest signal. Go to the App Store and search for “cell signal” to find available apps for your device.

Acceptable method: Check the bar indicator on your cell phone display and note where the signal appears the strongest. (Note: cell phone bars are only an approximation of signal strength and vary from phone to phone.) Phones can take up to 30
seconds to reset to a new reading. Be patient and repeat your signal check several times.

WAIT 30 SECONDS







Installation Details
As you plan your installation, keep the following guidelines in mind to maximize your signal strength:
Maintain a vertical distance of at least 20 feet or a horizontal distance of at least 50 feet between the Outside Antenna to the Inside Antenna.
If possible, place the Inside Antenna directly beneath the placement of the Outside Antenna location. This creates a maximized signal zone within the room where the Inside Antenna is located.
Outside Directional Antenna



Place the inside antenna directly beneath the placement of the Outside Antenna location
At least 20 feet of vertical or 50 horizontal separation



Inside Panel Antenna






Be sure the Inside Antenna is NOT facing toward the Outside Antenna.
This creates potential oscillation or feedback and reduces the
effectiveness of the Connect 4G-X.

If you do not know how to mount hardware or run coax cable through walls, ceilings and floors, get help from a weBoost Certified Installer or from a qualified contractor or electrician.
We recommend you install the Lightning Surge Protector (859902). Attach the cable from the Outside Directional Antenna to
the surge protector and ground the surge protector. The LSP is sold separately.
Quick Install
For more detailed instructions on installation, read the description later in this guide.
NOTE: Create a “soft” install first by testing components in your proposed locations before securing them with hardware.
Select a location on the roof of the building to install the Outside Antenna. Make sure the antenna is clear of obstructions that could block the signal from the nearest cellular tower.
Select a location to install the Connect 4G-X Signal Booster that is well ventilated and away from excessive heat, moisture, and direct sunlight.
Select a location for the Inside Antenna that is in the center of the area where the signal needs to be amplified
and a minimum of 20 vertical feet or 50 horizontal feet from the Outside Antenna.


Run the coax cable from the Outside Antenna to the Signal Booster and attach it to the connector labeled “Outside Antenna.” Connect another coax cable to the connector labeled
“Inside Antenna” and run it to the Inside Antenna. NOTE: Be careful not to bend the center pins on
the connectors when securing connections.
Once you have ensured all connections are tight, connect the Signal Booster to a surge protected power strip with at least a 1000 Joule rating to protect your equipment from power surges and lightning strikes. (See page 11 for information on lightning protection)
If your Connect 4G-X is working correctly, the lights will be green.
If the lights are not green, see the “Troubleshooting” starting on page 6.
Outside Antenna Installation
Select a location on the roof or an outside wall where the Outside Antenna can be mounted without obstruction (at least three feet of clearance in all directions) and with at least 20 feet of vertical or 50 feet of horizontal separation from the Internal Antenna.
After connecting the coax cable to the antenna, run it underneath the down side of your roof’s flashing if mounted on the roof. Tip: Often you can follow the route used by satellite TV cables. If you attach the Outside Antenna to a wall, run the cable along the outside
of the wall to the area where you want the cable to appear on the inside of the building, then drill a hole through the wall where the cable will enter
the building. Caution: Before drilling holes for the cable, be sure there are no electrical outlets, wiring, or sewer or water pipes you could puncture or sever.
Seal any holes with silicone, cable bushings or other waterproof sealant.
Signal Booster Installation
Select a location for the Signal Booster that is away from excessive heat, direct sunlight, moisture and well ventilated. The enclosure must NOT be air tight. Also, be sure the location is near a power source.

Connect the cables to the Signal Booster from the Outside Antenna and Inside Antenna at the designated ports.

Face inside antenna away from the outside antenna.


Inside Antenna

Do NOT connect the Signal Booster to the power source until all cables are connected.
Inside Antenna Installation
Select a location in the center of the area where you want cellular
signals improved to mount the Inside Antenna. If you have multiple rooms with poor signal, you may need multiple Inside Antennas. These can attach to the Signal Boost by using
a splitter (sold separately). Contact weBoost for more information.
Ensure a minimum of 20 feet vertical or 50 horizontal feet separation from the Outside Antenna.


Outside Directional Antenna



Place the inside antenna directly beneath the placement of the Outside Antenna location
At least 20 feet of vertical or 50 horizontal separation
Use the mounting hardware included in the package to secure the Inside Antenna to the selected location.
Powering Up The Signal Booster
Ensure the cables to both the Outside Antenna and Inside Antenna are securely connected before powering up the Signal Booster.
Plug the power supply into the Signal Booster input marked “POWER” and then into a surge protector power strip with a minimum 1000 Joule rating.



The lights on the Signal Booster should remain green . If the lights are not
green, see the “Troubleshooting” section starting on page 7.

Troubleshooting & Understanding Lights
The Connect 4G-X includes four indicator lights, one for each band (see FAQ for explanation of MHz bands). Each indicator light will either be green, orange or red.
Inside Panel Antenna








3.    Inside Antennas can be mounted above ceiling drywall, on a ceiling inside a room, or on a wall inside a room. Ensure the Inside Antenna
is facing AWAY from the Outside Antenna to avoid oscillation (feedback) and reduced performance.


Green indicates that the booster is powered and operating at maximum gain.
Solid Red indicates that the booster has shut off on the associated frequencies to prevent oscillation (feedback).


6    
Solid Orange indicates that the booster has shut off on the associated frequencies due to close proximity of a cell tower.
Green/Orange Blinking indicates that the booster is operating at a reduced gain due to close proximity of a cell tower.
Green/Red Blinking indicates that the booster is operating at a reduced gain to prevent oscillation (feedback).
Note: All red light issues must be resolved before orange light issues.


Fixing Red Light Issues
If one or more lights on the Signal Booster are red:
Make sure all connections are tight.
Increase the distance between the outside antenna and the inside antenna, by moving them horizontally and/or vertically farther apart until the light(s) change to green.
Lights Off
If one or more of the lights on the Signal Booster are off verify power to your surge protected power strip.
NOTE: The Signal Booster can be reset by disconnecting and reconnecting the power supply.


Additional FAQ:
What hours can I contact tech support?
Technical Support can be reached from 7:00am to 6:00pm MST, by calling (866- 294-1660).
How does weather affect the performance of my Outside Antenna?
Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective filter to cellular signal.  In times of heavy precipitation, you may see less performance.
What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know which MHz band my cell phone uses?
The Connect 4G-X works with all major North American cellular providers.
Traditionally, 800/1900MHz are associated with voice and 3G data; while 700MHz and 1700/2100MHz are associated with 4G data.

Follow the same steps for a green/red blinking light until the light goes solid green.
If more separation is not possible and the coverage of the booster is too small with a green/red blinking light indicating reduced gain, contact the weBoost Customer Support Team for assistance: 866-294-1660.
Inside Antenna Expansion Kit


Kit 309900-50N
2 - Wall Panel antennas
1 - 50 ohm 3-Way Splitter Kit 309905-50N
3 - Wall Panel Antennas
3 - 2-Way 50 Ohm Splitters Kit 309902-75F
2 - Wall Panel Antennas
1 - 3-Way 75Ohm Splitter
Kit 309903-75F
3 - Wall Panel Antennas
3 - 2-Way 75Ohm Splitters Kit 309904-75F
1 - Wall Panel Antenna
1 - 2-Way 75 Ohm Splitter

Inside Antenna Kits     
Kit 301121-40010
50 Ohm Dome Antenna
• 10’ Wilson 400
Kit 311135-40060
50 Ohm Wall Panel Antenna
• 60’ Wilson400
Kit 301151-0610
75 Ohm Dome Antenna
10’ RG6 Cable
Kit 311135-5820
50 Ohm Wall mount Panel Antenna
20’ RG58 Cable
50 Ohm Outside Antenna Kits


Kit 314453-5825
50 Ohm Pole Mount Panel Antenna
25’ RG58 Cable
Kit 314411-5825
50 Ohm Wide Band Directional
25’ RG58 Cable
Kit 301111-5850
Yagi Directional Antenna
50’ RG58 Cable Kit 311129-5840
800 MHz Yagi Directional
40’ RG58 Cable
Kit 311203-5820
Omni-Directional antenna
20’ RG58 Cable
Kit 311124-5830
1900 MHz Yagi antenna
30’ RG58 Cable
Kit 311203-40020
Omni-Directional antenna
20’ Wilson 400 Cable
Kit 301111-400170
Yagi Directional w/ N-Female
• 170’ Wilson400
Kit 311124-400100
1900 MHz Yagi Directional
100’ Wilson 400 Cablet
Kit 314411-40075
50 Ohm Wide Band Directional Antenna
75’ Wilson400 Cable
Kit 314453-40075
50 Ohm Pole Mount Panel Antenna
75’ Wilson400 Cable

75 Ohm Outside Antenna Kits


Kit 301111-0675
Yagi Directional Antenna
75’ RG6 Cable
N-Male to F-Female adapter
Kit 311201-0620
Omni Directional w/ F-Female
20’ RG6 Cable Kit 311129-0660
800 MHz Yagi Directional
60’ RG6 Cable
N-Male to F-Female adapter
Kit 311124-0650
1900 MHz Yagi Directional
500’ RG6 Cable
N-Male to F-Female adapter
Kit 314473-0640
75 Ohm Pole Mount Panel Antenna
40’ RG6 Cable
Kit 311141-0620
75 Ohm Grey Brick Antenna
20’ RG6 Cable
Kit 314475-0630
75 Ohm Wide Band Directional
30’ RG6 Cable

Mini-Mag Outside Antenna


301126 w/12.5 RG174 cable-SMA

Safety Guidelines

WARNING:     To uphold compliance with network protection standards, all active cellular devices must maintain at least 6 feet of separation distance from Panel and Dome antennas.
WARNING:     Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone.
WARNING:     Use only the power supply provided in this package.  Use of a non-Wilson Electronics product may damage your equipment.
WARNING:     The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in excess of that range.
WARNING:     Take care to ensure that neither you nor the pole comes near any power lines during installation.

WARNING:    The Outside Antenna must be installed no higher than 10 meters (32’9”) above ground.

RF SAFETY WARNING:  Any antenna used with this device must be located at least 8 inches from all persons.



This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.


For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.

Regarding weBoost, Wilson Pro, and zBoost Amplifiers:

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.

Please type your cell phone model in the search box at the top to view all available accessories for your phone model

Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.

Copyright Cell-Phone-Accessories.com | HTML Index


BBB Member

Best Service

Authorized Cell Phone Signal Booster Retailer

Cell Phone Signal Booster

Car Charger
Cell Phone Batteries