Search 

Weboost signal booster drive 3g-s (we-bo ... - Click to enlarge.
Weboost signal booster drive 3g-s (we-bo ... - Click to enlarge.

Weboost signal booster drive 3g-s


Weboost signal booster drive 3g-s ( ... - Larger item photo here.
Availability: Usually ships the same business day

Weboost signal booster drive 3g-s (we-boost 470106 drive 3gs)

470106Retail MSRP: $129.99Our Price with FREE Bluetooth Headset: $99.99

Quantity:

We will MATCH or BEAT lowest price offered on most cellular accessories.

Weboost signal booster drive 3g-s (we-boost 470106 drive 3gs). 3G boost for a single user in a vehicle. Enhances talk, text, and basic Internet on all cell phones with all wireless carriers.

The following parts made by the brand we-boost (AKA Wilson Electronics) in United States are included in this complete weBoost signal booster kit:

weBoost 470006 Dual-band Cell Phone Amplifier/ Repeater

weBoost 301126 Mini Magnet Antenna

weBoost 859965 Power Supply.

This Wilson Electronics / weBoost signal booster kit is compatible with following USA and Canada service Carriers:
  • AT&T Wireless
  • Bell Mobility
  • Boost Mobile
  • Chatr
  • C Spire
  • Fido
  • Cricket Wireless
  • Ice Wireless
  • Metro PCS
  • Koodo Mobile
  • Net10
  • nTelos
  • Shentel
  • Mobilicity
  • Simple Mobile
  • MTS
  • Sprint
  • NorthernTel
  • Straight Talk
  • Public Mobile
  • T-Mobile USA
  • Rogers Wireless
  • Ting
  • SaskTel
  • TracPhone
  • Telus Mobility
  • US Cellular
  • Videotron
  • Verizon Wireless
  • Virgin Mobile Canada
  • Virgin Mobile USA
  • Wind Mobile



    








Drive 3G-S™
Cellular Signal Booster





Need help?

ENGLISH
FRANÇAIS
www.cell-phone-accessories.com

weBoost Customer Support: 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST


IT IS VERY IMPORTANT
!    TO POWER YOUR SIGNAL BOOSTER USING A SURGE
PROTECTED AC POWER STRIP WITH AT LEAST A 1000 JOULE RATING.
FAILURE TO DO THIS WILL VOID YOUR WARRANTY IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE .
THE SIGNAL BOOSTER UNIT IS DESIGNED
!    FOR USE IN AN INDOOR, TEMPERATURE- CONTROLLED ENVIRONMENT (LESS
THAN 150 DEGREES FAHRENHEIT) . IT IS NOT INTENDED FOR USE IN ATTICS OR SIMILAR LOCATIONS SUBJECT TO TEMPERATURES IN EXCESS OF 150°F .

ENGLISH

Drive 3G-S™ Cellular Signal Booster 800 / 1900 MHz Model #470006 FCC: PWO460006 IC: 4726A-460006

The term “IC” before the radio certifi    number only signifi s that Industry Canada technical specifi    were met.



Contents
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Vehicle Installation Option   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
In-Building Installation Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting the Drive 3G-S Arms  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting & Understanding the Light  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Additional FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Optional Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
Safety and Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Signal Booster Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover















2

www.cell-phone-accessories.com

Need help?

weBoost Customer Support: 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST

Inside this Package







Drive 3G-S™

Mini-Magnet Mount Antenna
(301126)


DC Plug-In Power Supply
(2D9910 / 291170)

ENGLISH


Appearance of device and accessories may vary.

Optional Accessories

    


AC Power Supply
(2D9109)

Antenna Window Mount (Used with Mini-Magnet Mount Antenna) (901128)

Adjustable Desk Mount

(901137)
(859984)

Gooseneck Suction Cup Cradle Mount

All 3 available together in the Home Accessory Kit - 859100
Carrying case included

(901120)




 





Cup Holder Cradle Mount (901130)

Vehicle Dash Mounting Kit
-Rugged/Screw Mount-
-Adhesive Mount-
(901134)
(included in some kits)

Installation Options Vehicle Installation Option
ENGLISH
    •    Clean the area where the bracket is to be mounted with the alcohol wipe included. Allow the area to dry.
    •    Peel the backing to expose the adhesive and press the bracket onto the desired location on the dashboard . NOTE: Be sure the tab is positioned vertically.


    •    Allow the adhesive to cure for 24 hours before you attach the Drive 3G-S
(Step 4) .
    •    Install the Outside Antenna. Select a
location on top of the car that is:
    •    Near the center of the vehicle’s roof .
    •    At least 12 inches from any other
antennas .
    •    Free of obstructions .
    •    At least 6 inches from any windows
(including sunroofs) .
The Outside Antenna must be installed
vertically.


3 .   Run the Outside Antenna cable into the car . The cable is strong enough that it may be shut in most vehicle doors without damaging the cable . For a cleaner look, carefully pull down the door seal, run the cable under the seal, and push the seal
back into place. This method reduces wear
on the cable as the door opens and closes .


4 .     Attach the Drive 3G-S to the Mounting Bracket. After waiting 24 hours for the adhesive on the bracket to cure, attach the Drive 3G-S by aligning the rectangular hole on the back of the Drive 3G-S with the tab on the Mounting Bracket, grasping the sides of the Drive 3G-S, and sliding it
downward approximately ¼ inch into place.
The Mounting Bracket is designed to
swivel for more convenient viewing angles.
Once the Drive 3G-S is in place, you can adjust the angle of the bracket by
loosening the knurled nut, applying gentle pressure to the top or bottom of the Drive 3G-S, and then tightening the nut when the desired angle is achieved .


5 .    Attach the antenna to the Drive 3G-S . Connect the cable from the Outside Antenna to the antenna connector on the bottom of the Drive 3G-S . Do NOT plug in the power supply (next step) until the
Outside Antenna cable is connected to the Drive 3G-S .



Note: The Drive 3G-S has a convenient mini- USB charging port located on the right side of your booster. This port allows for charging your phone or device. weBoost offers several cables for this purpose .
    •    859966, mini-USB to mini-USB
    •    859979, mini-USB to iPhone (up to 4S)
    •    859967, mini-USB to micro-USB

6.    Power up your Drive 3G-S. Connect the power cable to the mini-USB port on the bottom of the Drive 3G-S . Then insert the adapter into the vehicle 12V DC power source. Use only the supplied weBoost power supply. While the Drive 3G-S may remain on, leaving the Drive 3G-S on
in a vehicle when it is not running may discharge the battery in a day or two. Also note that some 12V DC power sources are shut down when the vehicle ignition
is turned to off . Use a Bluetooth headset, wired hands-free device or speakerphone for talking on the phone .


In-Building Installation Option
Note: Home Offi    Accessory Kit sold separately
    •    Install the Outside Antenna to a window. For
best results:
    •    Select a window on the side of the building where you get the strongest cell signal.
    •    Attach the suction cup bracket (sold separately) to the inside of a window so the cable will reach the location of the Mounting Bracket and Drive 3G-S . Place the bracket as high on the window as possible .


NOTE: Many modern energy efficient dual pane windows use a metal coating that may decrease the strength of a cellular signal, reducing the effectiveness of
the Drive 3G-S. If you have dual pane windows, consider a weBoost signal boost product that provides an option for
mounting an antenna on an outside wall or
roof of a building .
    •    With the bracket in place, attach the

magnet base of the antenna to the flat surface of the bracket . The antenna must be mounted vertically for the best signal.


    •    ENGLISH
will use the phone. The location should be at least three feet from the Outside Antenna to avoid oscillation (feedback) . Your cell phone must be in the cradle for the Drive 3G-S to amplify the signal. Use a Bluetooth headset, wired hands-free device or speakerphone for talking on the phone .
3 .    Attach the antenna to the Drive 3G-S . Connect the cable from the Outside Antenna to the antenna connector on the bottom of the Drive 3G-S . Do NOT plug in the power supply (next step) until the
Outside Antenna cable is connected to the Drive 3G-S .



    •    Power up your Drive 3G-S. Connect the power cable to the mini-USB port on the bottom of the Drive 3G-S . Then insert the adapter into the AC power supply (859969), sold separately. Use only the supplied weBoost power supply.

Adjusting the Drive 3G-S Arms
To change arms, gently lift the arm upward until
ENGLISH



To reposition arms, move the arm above a different slot on the Drive 3G-S  and gently slide the arm down until the arm is fi    in place .



Troubleshooting & Understanding the Light
The Signal Boost includes a indicator light on the side of the Drive 3G-S . The indicator light will either be green or red.



Green indicates that the booster is
powered and operating at maximum gain.
Solid Red indicates that the booster has shut off on the associated frequencies to prevent oscillation (feedback) .

Green/red Blinking indicates that the booster is operating at a reduced gain to prevent oscillation (feedback) .
Fixing Red Light Issues
If one or more lights on the Signal Boost are red: 1 .    Make sure all connections are tight .
    •    Increase the distance between the outside antenna and the Drive 3G-S, by moving them horizontally and/or vertically farther apart until the light(s) change to green . Remember to keep the antenna at least  6 inches from any window or sunroof.
    •    Follow the same steps for a green/red blinking light until the light goes solid green .
4 .    If more separation is not possible and the coverage of the booster is too small with a green/red blinking light indicating reduced gain, contact the weBoost Customer Support Team for assistance:
866-294-1660.
Lights Off
    •    Check connections on the power supply
to see that it is firmly plugged into both the Drive 3G-S and the power source.
    •    If using a DC power supply in your vehicle, ensure the power supply is properly inserted. Then check the 12 volt power from the car socket and the fuse. Replace the fuse if necessary.
    •    If using a power strip in a building, ensure the power strip is plugged in and turned on and that power is coming from the outlet .
NOTE: The Signal Booster can be reset by disconnecting and reconnecting the power supply.




Additional FAQ:
What hours can I contact customer support? Customer Support can be reached from 7:00am to 6:00pm MST by calling (866-294-1660), or by
email, at support@weboost.com

How does weather affect the performance of my Outside Antenna?
Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective filter to cellular signal. In times of heavy precipitation, you may see less performance .
What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know which MHz band my cell phone uses?
The Drive 3G-S works with all major North American cellular providers on the 800 & 1900 MHz frequencies. Traditionally, 800/1900MHz are

associated with voice and 3G data; while 700MHz and 1700/2100MHz are associated with 4G data. For more detail see below.

Carrier Frequency Use
ENGLISH




Mobile Antennas
Mini-Mag
• 301126 w/ 12.5 RG174
cable- SMA
• 301113 w/ 12.5 RG174
cable - FME
12” Mag Mount w/ 12.5’ RG174
• 311103
• 311125
• 311128
• 311703
• 314202
Trucker antenna w/10.5’ RG58
• 311101
• 311701
Trucker antenna w/13.5’ RG58
• 311119
• 311133
NMO Antenna’s w/ RG174
Kit 311104-17410
    •    800/1900 NMO antenna
    •    10’ RG174 cable Kit 311112-17410
    •    800/1900 NMO antenna
    •    10’ RG174 cable Kit 314203-17410
• 800/900/1900 NMO antenna
    •    10’ RG174 cable
Marine Antenna
Kit 311130-5810
    •    Marine Antenna
    •    10’ RG58 cable
Glass Mount w/14’ RG58 cable
• 311102
    •    311114 ( Mini Glass Mount)
NMO Antenna’s w/ RG58
Kit 311104-5810
    •    800/1900 NMO antenna
    •    10’ RG58 cable


Kit 311112-5810
    •    800/1900 NMO antenna
    •    10’ RG58 cable Kit 314203-5810
• 800/900/1900 NMO antenna
    •    10’ RG58 cable
Outside Fixed Antennas 50 Ohm Outside Antenna Kits Kit 314453-5825
    •    50 Ohm Pole Mount Panel
Antenna
    •    25’ RG58 Cable Kit 314411-5825
    •    50 Ohm Wide Band
Directional
    •    25’ RG58 Cable Kit 301111-5850
    •    Yagi Directional Antenna
    •    50’ RG58 Cable Kit 311129-5840
    •    800 MHz Yagi Directional
    •    40’ RG58 Cable Kit 311203-5820
    •    Omni-Directional antenna
    •    20’ RG58 Cable Kit 311124-5830
    •    1900 MHz Yagi Antenna
    •    30’ RG58 Cable Kit 314411-40075
    •    50 Ohm Wide Band
Directional
    •    75’ Wilson 400 Cable Kit 311203-40020
    •    Omni-Directional antenna
    •    20’ Wilson400 Cable Kit 301111-400170
    •    Yagi Directional w/ N-Female
• 170’ Wilson400


Kit 311124-400100
    •    1900 MHz Yagi Directional
    •    100’ Wilson400 Cable Kit 311129-400100
    •    800 MHz Yagi Antenna
    •    100’ Wilson-400 Cable Kit 314453-40075
    •    50 Ohm Pole Mount Panel
Antenna
    •    75’ Wilson400 Cable
75 Ohm Outside Antenna Kits
Kit 301111-0675
    •    Yagi Directional Antenna
    •    75’ RG6 Cable
    •    N-Male to F-Female adapter Kit 311201-0620
    •    Omni Directional w/ F-Female
    •    20’ RG6 Cable Kit 311129-0660
    •    800 MHz Yagi Directional
    •    60’ RG6 Cable
    •    N-Male to F-Female adapter Kit 311124-0650
    •    1900 MHz Yagi Directional
    •    50’ RG6 Cable
    •    N-Male to F-Female adapter Kit 314473-0640
    •    75 Ohm Pole Mount Panel
Antenna
    •    40’ RG6 Cable Kit 314475-0630
    •    75 Ohm Wide Band Directional
    •    30’ RG6 Cable Kit 311141-0620
    •    75 Ohm Grey Brick Antenna
    •    20’ RG6 Cable


Kit 301111-11140
    •    Yagi Directional Antenna
    •    140’ RG11 Cable
    •    N-Male to F-Female adapter Kit 311201-1120
    •    Omni Directional w/ F-Female
    •    20’ RG11 Cable Kit 311129-11110
    •    800 MHz Yagi Directional
    •    110’ RG11 Cable
    •    N-Male to F-Female adapter Kit 311124-1180
    •    1900 MHz Yagi Directional
    •    80’ RG11 Cable
    •    N-Male to F-Female adapter Kit 314473-1175
    •    75 Ohm Pole Mount Panel
Antenna
    •    75’ RG11 Cable Kit 314475-1175
    •    75 Ohm Wide Band Directional
    •    75’ RG11 Cable Kit 311141-1120
    •    75 Ohm Grey Brick Antenna
    •    20’ RG11 Cable

Safety and Recommendations

WARNING:   Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell
phone .

ENGLISH
equipment  .

WARNING:   To uphold compliance with network protection standards, all active wireless devices must maintain at least 18” of separation distance from mobile inside antennas, 4’ of separation distance from desktop antennas and 6’ of separation distance from Panel and Dome antennas .

WARNING:   The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit) . It is not intended for use in attics or similar locations subject to temperatures in excess of that range .

RF SAFETY WARNING:  Any antenna used with this device must be located at least 8 inches from all persons. The FCC requires that a cell phone with cradle attached may only be used with the cradle mounted as illustrated in this installation guide. A cell phone held near the ear must be without the cradle attached.

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.

This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment .
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot  be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter
incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.





8    Need help?    www.weboost.com    Customer Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST

ENGLISH


Drive 3G-S
Model Number
470006
Connectors
SMA-Female
Antenna Impedance
50 Ohms
Frequency
824-894 MHz/1850-1990 MHz
Passband Gain (nominal)
800 MHz    1900 MHz
20.8    18 .6

20 dB Bandwidth (MHz)
800 MHz    1900 MHz
Typical
Maximum
42.1    82.2
43 .6    83 .4

Power output for single cell phone (dBm)
800 MHz    1900 MHz
Uplink
Downlink
22.9    25.2
-28.0    -29.1
Power output for multiple received channels (Uplink) dBm
No. Tones

800 MHz    1900 MHz
2
25.4    21.4
3
21.9    17 .9
4
19 .4    15 .4
5
17 .4    13 .4
6
15 .8    11 .8
Power output for multiple received channels (Downlink) dBm
No. Tones

800 MHz    1900 MHz
2
-26.6    -28.8
3
-30.2    -32.3
4
-32.7    -34 .8
5
-34 .6    -36 .7
6
-36.2    -38 .3
Noise Figure (typical downlink/uplink)
3 dB nominal
Isolation
> 40 dB
Power  Requirements
5 .5 V 1A
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.


2-Year Warranty

weBoost Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by weBoost. weBoost shall, at its option,
either repair or replace the product. weBoost will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.
This warranty does not apply to any Signal Boosters determined by weBoost to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties.
Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty. RMA numbers may be obtained by contacting Customer Support at 866-294-1660.

Disclaimer: The information provided by weBoost is believed to be complete and accurate.  However, no responsibility is assumed by weBoost for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use.


For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.

Regarding weBoost, Wilson Pro, and zBoost Amplifiers:

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.

Please type your cell phone model in the search box at the top to view all available accessories for your phone model

Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.

Copyright Cell-Phone-Accessories.com | HTML Index


BBB Member

Best Service

Authorized Cell Phone Signal Booster Retailer

Cell Phone Signal Booster

Car Charger
Cell Phone Batteries