Search 

Weboost signal booster drive 3g-x (we-bo ... - Click to enlarge.
Weboost signal booster drive 3g-x (we-bo ... - Click to enlarge.

Weboost signal booster drive 3g-x


Weboost signal booster drive 3g-x ( ... - Larger item photo here.
Availability: Usually ships the same business day

Weboost signal booster drive 3g-x (we-boost 470111 drive 3gx)

470111Retail MSRP: $399.99Our Price with FREE Bluetooth Headset: $399.99

Quantity:

We will MATCH or BEAT lowest price offered on most cellular accessories.

Weboost signal booster drive 3g-x (we-boost 470111 drive 3gx) 3G boost at maximum range for multiple users in a vehicle. Enhances talk, text, and basic Internet on all mobile phones with all carriers.

The following parts made by the brand we-boost (AKA Wilson Electronics) in United States are included in this complete weBoost signal booster kit:

weBoost 470011 Dual-band Cell Phone Amplifier/ Repeater

weBoost 301152 Slim Profile Inside Antenna

weBoost 311125 12" Magnet Mount w/ 12.5' RG174 Antenna

weBoost 859938 Power Supply.

This Wilson Electronics / weBoost signal booster kit is compatible with following USA and Canada service Carriers:
  • AT&T Wireless
  • Bell Mobility
  • Boost Mobile
  • Chatr
  • C Spire
  • Fido
  • Cricket Wireless
  • Ice Wireless
  • Metro PCS
  • Koodo Mobile
  • Net10
  • nTelos
  • Shentel
  • Mobilicity
  • Simple Mobile
  • MTS
  • Sprint
  • NorthernTel
  • Straight Talk
  • Public Mobile
  • T-Mobile USA
  • Rogers Wireless
  • Ting
  • SaskTel
  • TracPhone
  • Telus Mobility
  • US Cellular
  • Videotron
  • Verizon Wireless
  • Virgin Mobile Canada
  • Virgin Mobile USA
  • Wind Mobile



Drive 3G-X™
Cellular Signal Booster
Need help?        Customer Support  866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm
Installation Instructions for the Following weBoost Signal Boosters: Drive 3G-XTM  SmarTech   ® Signal Booster
Model # 470011    FCC ID: PWO460011    IC: 4726A-460011

The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
Contents
Package Contents    3
Optional Accessories    3
Before Getting Started    3
Quick Install    3
Understanding the Lights    5
Alternate Antenna Installations    5
Additional FAQ    7
Safety Guidelines    9
Signal Booster Specifications    11
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Package Contents

Kit Configuration
weBoost manufactures a wide variety of antennas to help you customize your Signal Booster for your specific application. See your dealer



12” Mag Mount
w/12.5’ RG174
(311125)
Slim Low Profile
w/10’ RG174
(301152)
Power Supply
12V / 3.3A
(859938)
Before Getting Started
Before you install your Drive 3G-X Booster and start enjoying improved cellular reception please do the following:
Read through all the installation steps. This will help you know what to expect from start to finish.
Familiarize yourself with all materials in your product package. This will allow you to know which pieces are referenced in the instructions.
Install
You can install your Drive 3G-X Signal Booster in your vehicle using the following steps. NOTE: Before completing your installation, create a “soft” installation by putting the components of your Drive 3G-X Signal Booster in place and testing the operation before mounting equipment.
Install the Outside Antenna. Select a location on top of the car that is:
Near the center of the vehicle’s roof.
At least 12 inches from any other antennas.
Free of obstructions.
At least 6 inches from any windows (including sunroofs).
At least 8 inches from any people.
The Outside Antenna must be installed vertically on a metallic surface.
and that has proper ventilation. Good locations include underneath a seat or under the dashboard.
Connect the wire from the Outside Antenna to the port labeled “Outside Antenna” on the Signal Booster.

Run the Outside Antenna cable into the car. The cable is strong enough that it may be shut in most vehicle doors without damaging the cable. For a cleaner look, carefully pull down the door seal, run the cable under

From Inside Antenna

From Outside Antenna



Power Adapter
the seal, and push the seal back into place. This method reduces wear
on the cable as the door opens and closes.



Install the Low-Profile Inside Antenna.
Identify a place on the right side of the driver’s seat to mount the Inside Antenna. The location should be at least 18 inches but no more than  36 inches from where the cellular device will be used.
Install the Inside Antenna at the same angle as the cell phone when held in use or near the laptop’s cellular data card to maximize signal strength.
For a more professional look, you can install the Inside Antenna underneath a car seat cover or upholstery.
When you have tested the functionality of your Signal Booster, mount the Inside Antenna by peeling off the backing of the Velcro® and attach it to your selected location
on the seat and secure the Inside Antenna.
Place and connect the Drive 3G-X Signal Booster.
Select a location for the Signal Booster that is free from excessive heat, direct sunlight and moisture
Connect the wire from the Inside
Antenna to the port labeled “Inside Antenna” on the Signal Booster.
Plug the power adapter into vehicle’s 12V DC power supply and attach the cord to the side of Power Booster labeled “Power.”
NOTE: Do NOT connect the power to the Signal Booster until you have connected both the Inside and Outside Antennas.
Power up your Signal Booster by flipping the switch on the back of the DC power adapter on. A red light should appear on the power adapter.
Note: The Drive 3G-X Signal Booster may remain on, in vehicles whose 12V DC power sources do not automatically shutdown when the vehicle is turned off. This could result in discharging the vehicles battery in one to two days.
Note: Some 12V DC power sources are shut down when the vehicle ignition is turned to off. Refer to your vehicle owners manual for specifics related to your vehicle.
Note: The aluminum casing of your Signal Booster will adjust to the temperature of its environment, but is designed to protect the Signal Booster technology. For example, in the summer, the Signal Booster case may be as hot as 150 degrees inside your vehicle. These high temperatures will
NOT damage the Signal Booster, nor do they pose a fi    risk to the vehicle. Again, be sure to place your Signal Booster in a
location with adequate ventilation and away from direct sunlight or moisture.
Troubleshooting & Understanding Lights
The Signal Boost includes two indicator lights on the front of the Drive 3G-X. The indicator lights will either be green or red.

          


Green indicates that the booster is powered and operating at maximum gain.
Solid Red indicates that the booster has shut off on the associated frequencies to prevent oscillation (feedback).
Green/red Blinking indicates that the booster is operating at a reduced gain to prevent oscillation (feedback).
Fixing Red Light Issues
If one or more lights on the Signal Boost are red:
Make sure all connections are tight.
Increase the distance between the outside antenna and the Drive 3G-X, by moving them horizontally and/or vertically farther apart until the light(s) change to green. Remember to keep the antenna at least 6 inches from any window or sunroof.
Follow the same steps for a green/red blinking light until the light goes solid green.
If more separation is not possible and the coverage of the booster is too small with a green/red blinking light indicating reduced gain, contact the weBoost Customer Support Team for assistance: 866-294-1660.
Lights Off
Check connections on the power supply to see that it is firmly plugged into both the Drive 3G-X and the power source.
If using a DC power supply in your vehicle, ensure the power supply is properly inserted. Then check the 12 volt power from the car socket and the fuse. Replace the fuse if necessary.
If using a power strip in a building, ensure the power strip is plugged in and turned on and that power is coming from the outlet.
NOTE: The Signal Booster can be reset by disconnecting and reconnecting the power supply.
Alternate Outside Antenna Installation: NMO Mount
Select a location for mounting the antenna. The best location would be centered on the vehicle roof, although other locations are acceptable.
Roof mount only: For mounting the antenna to the roof of your vehicle, use weBoost #905814 (3/8 in. w/RG58 cable) or #907414 (3/8 in. w/RG174 cable), which must be purchased separately (A). Drill a hole in the desired location for mounting. The size of the hole should be 3/8 in.
The plastic washer (B) should be placed over the threads of the NMO mount (A). From the inside of the vehicle, insert the threaded portion of the mount up through the hole in the vehicle.
From the top of the vehicle, screw the threaded nut (D) onto the mount threads coming up through the roof and tighten until secure.
The black rubber washer (C) should now be positioned around the threaded nut.
Working from the inside of the vehicle, securely route and position the cable provided.
Screw the NMO antenna assembly (E) into place on top of the vehicle.









NMO Antenna Assembly







Rubber Seal
Threaded Nut



(C) Rubber Washer



If you are installing on a mirror, clamp the mount to the mirror support and tighten the four nuts and bolts. If you are mounting directly to the side of your RV, remove
the nuts, bolts and the smaller half of the mount and use the four holes in the larger half to attach it flush to the side of the RV, using screws or bolts, nuts and washers appropriate for your particular installation.


(B) Plastic Washer




(A) NMO Connector Cable


Alternate Outside Antenna Installation: RV/Trucker Antenna
Select a suitable location to install the antenna on your RV, as high on the vehicle as possible and at least 12 inches away from any other antenna. For best results, use weBoost 3-Way Mount (#901104).
This bracket will enable you to mount the antenna on a mirror or attach it to the side of your RV.
Screw the six antenna radials into the holes under the plastic coil housing on the antenna. The included thread-locker liquid must be used to ensure the radials do not vibrate loose. Tighten the radials snugly with a wrench.













Alternate Outside Antenna Installation: Marine Antenna
The weBoost Marine Antenna should be mounted as high as possible with no obstructions. Marine antennas work on
a “line-of-sight” basis, so the higher your
antenna is, the farther it can receive a signal. This gives you a greater range for your cellular communications.
Screw the six radials into the holes near the base of the antenna. The included thread-locker liquid must be used to ensure the radials do not vibrate loose. Tighten the radials snugly with a wrench.
Additional FAQ:
What hours can I contact customer support?
Customer Support can be reached from 7:00am to 6:00pm MST, by calling (866-294-1660)
How does weather affect the performance of my outside antenna?
Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective filter to cellular signal. In times of heavy precipitation, you may see less performance.
What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know which MHz band my cell phone uses?
The Drive 3G-X works with all major North American cellular providers on the 800 & 1900 MHz frequencies. Traditionally, 800/1900MHz are associated with voice and 3G data; while 700MHz and 1700/2100MHz are associated with 4G data.

Carrier Frequency Use
Use the 1 inch 14-thread coupler to attach the antenna to any standard marine mounting bracket. The coupler provides  a feed through for routing the connecting
cable, which will run to your cellular device, or weBoost Signal Booster.
Once the mounting bracket is attached to your boat, yach, etc., attach the connecting cable to the antenna’s 7 inches coax cable and route it to the location of your Signal Booster.


Mount to Your Boat, Yacht, etc.
Mobile Antenna Kit  Options
INSIDE ANTENNA OPTIONS
Slim Low Profile
301152 - w/ 10’ RG174
Low Profile
311106 - w/ 10’ RG58
OUTSIDE ANTENNA OPTIONS
Mini-Mag
301126 w/ 12.5 RG174 cable- SMA
301113 w/ 12.5 RG174 cable - FME
12” Mag Mount
311103 w/ 12.5’ RG174
311125 w/ 12.5’ RG174
311128 w/ 12.5’ RG174
314202 w/ 12.5’ RG174
311703 w/ 12.5’ RG174
Trucker Antenna
311701 w/10.5’ RG58
Trucker Antenna
311119 w/13.5’ RG58
311133 w/13.5’ RG58
Marine Antenna
311130-5810 w/10.5’ RG58
Glass Mount
311102 w/14’ RG58
311114 w/14’ RG58
NMO Antenna
Kit 314203-5810
• 800/900/1900 NMO Antenna
10’ RG58 Cable Kit 311112-17410
800/1900 NMO Antenna
14’ RG174 Cable Kit 314203-17410
• 800/900/1900 NMO Antenna
14’ RG174 Cable Kit 311104-17410
• 800/900/1900 NMO Antenna
10’ RG174 Cable
Fixed Antenna Kit  Options
INSIDE ANTENNA OPTIONS
Kit 309900-50N
2- Wall Panel antennas
1- 50 ohm 3-Way Splitter Kit 309905-50N
3- Wall Panel Antennas
3- 2-Way 50 Ohm Splitters Kit 309902-75F
2- Wall Panel Antennas
1-3-Way 75Ohm Splitter Kit 309903-75F
3- Wall Panel Antennas
3- 2-Way 75Ohm Splitters Kit 309904-75F
1- Wall Panel Antenna
1- 2-Way 75 Ohm Splitter Kit 301121-40010
50 Ohm Dome Antenna
• 10’ Wilson 400

Kit 311135-40060
50 Ohm Wall Panel Antenna
• 60’ Wilson400
Kit 301151-0610
75 Ohm Dome Antenna
10’ RG6 Cable Kit 311135-5820
50 Ohm Wall mount Panel
Antenna
20’ RG58 Cablet Kit 301151-1110
75 Ohm Dome Antenna
10’ RG11 cable Kit 311155-1150
75 Ohm Wall mount Panel
Antenna
50’ RG11 Cable Kit 311155-0630
75 Ohm Wall mount Panel
Antenna
30’ RG11 Cable
50 Ohm Outside Antenna Kit
Kit 311203-5820
Omni-Directional antenna
20’ RG58 Cable
75 Ohm Outside Antenna Kit
Kit 311201-0620
Omni Directional w/ F-Female
20’ RG6 Cable Kit 311141 - 0620
75 Ohm Grey Brick Antenna
20’ RG6 Cable
Safety Guidelines

Warning:    In a wireless installation, do not plug the Signal Booster directly into the cell phone or cellular data card using an antenna adapter. It will damage the Signal Booster, cell phone or cellular data card.

Warning:    Do not plug in the DC power supply until the Outside and Inside Antenna cables are attached to the Signal Booster.

Warning:    Warning: The Inside Mobile Antennas must have 1.5 feet of separation distance from all users and the Inside Fixed Antennas must have 6 feet of separation distance from all users.

Warning:    RF Safety: Any antenna used with this device must be located at least 8 inches from all persons.

Warning:    Use only the power supply provided in this package. The power supply must be 12 V DC Output.


This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.



Signal Booster Specifications


Drive 3G-X
Model Number
460011
Connectors
SMA
Antenna Impedance
50 Ohms
Frequency
824-894 MHz and 1850-1990 MHz
Passband Gain (nominal)
800 MHz    1900 MHz
47.8    44.2
20 dB Bandwidth (MHz)
800 MHz    1900 MHz
Typical Maximum
37.8    79.4
39.4    80.4
Power output for single cell phone (dBm)
800 MHz    1900 MHz
Uplink Downlink
29.0    27.1
-7.9    0.7
Power output for multiple received channels (Uplink) dBm
No. Tones

800 MHz    1900 MHz
2
26.7    24.2
3
23.2    20.6
4
20.7    18.1
5
18.8    16.2
6
17.2    14.6
Power output for multiple received channels (Downlink) dBm
No. Tones

800 MHz    1900 MHz
2
-14.3    -15.5
3
-17.8    -19.1
4
-20.3    -21.6
5
-22.3    -23.5
6
-23.9    -25.1
Noise Figure (typical downlink/uplink)
4 dB nominal
Isolation
> 90 dB
Power  Requirements
12-15 V, 2 A (subject to uplink power)
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for fi    minutes,   it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (fi     such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.


For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.

Regarding weBoost, Wilson Pro, and zBoost Amplifiers:

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.

Please type your cell phone model in the search box at the top to view all available accessories for your phone model

Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.

Copyright Cell-Phone-Accessories.com | HTML Index


BBB Member

Best Service

Authorized Cell Phone Signal Booster Retailer

Cell Phone Signal Booster

Car Charger
Cell Phone Batteries