Search 

Weboost signal booster drive 4g-s (we-bo ... - Click to enlarge.
Weboost signal booster drive 4g-s (we-bo ... - Click to enlarge.

Weboost signal booster drive 4g-s


Weboost signal booster drive 4g-s ( ... - Larger item photo here.
Availability: Usually ships the same business day

Weboost signal booster drive 4g-s (we-boost 470107 drive 4gs)

470107Retail MSRP: $199.99Our Price with FREE Bluetooth Headset: $179.99

Quantity:

We will MATCH or BEAT lowest price offered on most cellular accessories.

Weboost signal booster drive 4g-s (we-boost 470107 drive 4gs). 3G & 4G LTE boost for a single user in a vehicle. Enhances talk, text, and high-speed Internet on all cell phones with all carriers.

The following parts made by the brand we-boost (AKA Wilson Electronics) in United States are included in this complete weBoost signal booster kit:

weBoost 470007 5-Band Cell Phone Amplifier/ Repeater

weBoost 301126 Mini Magnet Antenna

weBoost 859910 Power Supply.

This Wilson Electronics / weBoost signal booster kit is compatible with following USA and Canada service Carriers:
  • AT&T Wireless
  • Bell Mobility
  • Boost Mobile
  • Chatr
  • C Spire
  • Fido
  • Cricket Wireless
  • Ice Wireless
  • Metro PCS
  • Koodo Mobile
  • Net10
  • nTelos
  • Shentel
  • Mobilicity
  • Simple Mobile
  • MTS
  • Sprint
  • NorthernTel
  • Straight Talk
  • Public Mobile
  • T-Mobile USA
  • Rogers Wireless
  • Ting
  • SaskTel
  • TracPhone
  • Telus Mobility
  • US Cellular
  • Videotron
  • Verizon Wireless
  • Virgin Mobile Canada
  • Virgin Mobile USA
  • Wind Mobile




Drive 4G-S™
Cellular Signal Booster


Need help?
Customer Support 866-294-1660  
Mon.- Fri. Hours: 7 am to 6 pm MST

IT IS VERY IMPORTANT TO POWER YOUR SIGNAL BOOSTER USING A SURGE PROTECTED AC POWER STRIP WITH AT LEAST A 1000 JOULE RATING. FAILURE TO DO THIS WILL VOID YOUR WARRANTY IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE. !  THE SIGNAL BOOSTER UNIT IS DESIGNED FOR USE IN AN INDOOR, TEMPERATURECONTROLLED ENVIRONMENT (LESS THAN 150 DEGREES FAHRENHEIT). IT IS NOT INTENDED FOR USE IN ATTICS OR SIMILAR LOCATIONS SUBJECT TO TEMPERATURES IN EXCESS OF 150°F. !  


Drive 4G-S™ operates on (Band 12/17, 13) 700 / 800 / AWS (1700 / 2100) / (Band 2) 1900 MHz Model #470007   FCC: PWO460007   IC: 4726A-460007
FCC requires to never use the cell phone in the cradle next to your ear.
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.

Contents
Package Contents ...............................................................2

Installation Options ..............................................................3

Option 1: Vehicle Installation  ...................................................3

Option 2: In-Building Installation .................................................4
Adjusting the Drive 4G-S Arms ....................................................5
Troubleshooting Understanding the Drive 4G-S Light .................................5
Additional FAQ ..................................................................6
Safety and Recommendations .....................................................6
Optional Accessories ............................................................7
Signal Booster Specifications .....................................................8
Warranty .............................................................. Back Cover

Inside this Package
Drive 4G-S® Mini-Magnet Mount Antenn(301126)  DC Plug-In Power Supply & USB cable a  Vehicle Dash Adhesive  
(2D9910 / 291170)  Mounting Bracket  
Optional Accessories  





AC Power Supply (Used with Mini-Magnet Desk Mount Supply
Suction Cup Cradle Mount

-Adhesive Mount
(2D9109) Mount Antenna) (901137) (859984)


Cradle Mount (901130)
(901134)
(901128)
(901120)

(included in some kits)
All 3 available together in the Home Accessory Kit - 859100
Carrying case included


Appearance of device and accessories may vary. (This product is not marketed by Verizon Wireless or AT&T).
1.     Attach the Mounting Bracket to the vehicle’s dashboard.
•     
Clean the area where the bracket is to be mounted with the alcohol wipe included. Allow the area to dry.


Peel the backing to expose the adhesive and press the bracket onto the desired location on the dashboard. NOTE: Be sure the tab is positioned vertically.


Allow the adhesive to cure for 24 hours



before you attach the Drive 4G-S (Step 4).
2.     Install the Outside Antenna. Select a location on top of the car that is:

Near the center of the vehicle’s roof.

•     
At least 12 inches from any other antennas.


Free of obstructions.


At least 6 inches from any windows


(including sunroofs).

• At least 8 inches from any people.
The Outside Antenna must be installed vertically.
3.     Run the Outside Antenna cable into the car. The cable is strong enough that it may be
shut in most vehicle doors without damaging
the cable. For a cleaner look, carefully pull
down the door seal, run the cable under the
seal, and push the seal back into place. This
method reduces wear on the cable as the
door opens and closes.

4.     Attach the Drive 4G-S to the Mounting
Bracket. After waiting 24 hours for the

adhesive on the bracket to cure, attach the Drive 4G-S by aligning the rectangular
hole on the back of the Drive 4G-S with

the tab on the Mounting Bracket, grasping the sides of the Drive 4G-S, and sliding it
downward approximately ¼ inch into place.
The Mounting Bracket is designed to
swivel for more convenient viewing

angles. Once the Drive 4G-S is in place, you can adjust the angle of the bracket by loosening the knurled nut, applying gentle pressure to the top or bottom of the Drive
4G-S, and then tightening the nut when
the desired angle is achieved.


5. Attach the antenna to the Drive 4G-S. Connect the cable from the Outside Antenna to the antenna connector on the bottom of the Drive 4G-S. Do NOT plug in the power supply (next step) until the Outside Antenna cable is connected to the Drive 4G-S.


Note: The Drive 4G-S has a convenient USB charging port located on the right side of your booster. This port allows for charging your phone or device, using your existing cable.
6. Power up your Drive 4G-S. Connect the power cable to the mini-USB port on the bottom of the Drive 4G-S. Then insert the adapter into the vehicle 12V DC power source. Use only the supplied weBoost power supply. While the Drive 4G-S may remain on, leaving the Drive 4G-S on in a vehicle when it is not running may discharge the battery in a day or two. Also note that some 12V DC power sources are shut down when the vehicle ignition is turned to off. Use a Bluetooth headset, wired hands-free device or speakerphone for talking on the phone.

Option 2: In-Building Installation
Note: Home Office Accessory Kit sold
separately
1.     Install the Outside Antenna to a window.
For best results:
•     Select a window on the side of the building where you get the strongest
cell signal.
• Attach the suction cup bracket (sold
separately) to the inside of a window so the cable will reach the location of the
Mounting Bracket and Drive 4G-S. Place
the bracket as high on the window as
possible.

• With the bracket in place, attach the
magnet base of the antenna to the flat

surface of the bracket. The antenna must be mounted vertically for the best signal.


2. Install the Mounting Bracket and Drive 4G-S.


Put your Drive 4G-S in the Mounting Bracket (see instructions under Vehicle Installation) and place it in a convenient location such as a desk or table top in the
room where you will use the phone. The

location should be at least three feet from the Outside Antenna to avoid oscillation (feedback). Your cell phone must be in the cradle for the Drive 4G-S to amplify the
signal. Use a Bluetooth headset, wired
hands-free device or speakerphone for talking on the phone.

3.     Attach the antenna to the Drive 4G-S. Connect the cable from the Outside Antenna to the antenna connector on the bottom of the Drive 4G-S. Do NOT plug in the power supply (next step) until the Outside Antenna cable is connected to the Drive 4G-S.


NOTE: Many newer energy efficient dual pane windows use a metal coating that may
decrease the strength of a cellular signal, reducing the effectiveness of the Drive 4G-S.
If you have dual pane windows, consider a weBoost signal boost product that provides
an option for mounting an antenna on an
outside wall or roof of a building.
4. Power up your Drive 4G-S. Connect the power cable to the mini-USB port on the bottom of the Drive 4G-S. Then insert the adapter and power it on. Use only the supplied weBoost power supply.



To reposition arms, move the arm above a different slot on the Drive 4G-S  and gently slide
the arm down until the arm is firmly in place.




Troubleshooting & Understanding the Light
The Signal Boost includes a indicator light on the side of the Drive 4G-S. The indicator light
will either be green or red.

Green indicates that the booster is
powered and operating at maximum gain.
Solid Red indicates that the booster has shut off on the associated frequencies to prevent oscillation (feedback).
Green/red Blinking indicates that the booster is operating at a reduced gain to prevent oscillation (feedback).
Fixing Red Light Issues
If one or more lights on the Signal Boost are red:

1.     
Make sure all connections are tight.


2.     
Increase the distance between the outside


antenna and the Drive 4G-S, by moving them horizontally and/or vertically farther apart until the light change to green. Remember to keep the antenna at least 6
inches from any window or sunroof.
3.     Follow the same steps for a green/red
blinking light until the light goes solid green.

4.     If more separation is not possible and the
coverage of the booster is too small with a
green/red blinking light indicating reduced
gain, contact the weBoost Customer
Support Team for assistance:
866-294-1660.



Lights Off

1.     
Check connections on the power supply to see that it is firmly plugged into both the Drive 4G-S and the power source.

2.     
If using a DC power supply in your vehicle, ensure the power supply is



properly inserted. Then check the 12 volt
power from the car socket and the fuse.
Replace the fuse if necessary.

3.     If using a power strip in a building, ensure the power strip is plugged in and turned on and that power is coming from the
outlet.
NOTE: The Signal Booster can be reset by
disconnecting and reconnecting the power
supply.
 


Additional FAQ:
What hours can I contact customer support?
Customer Support can be reached from 7:00am to 6:00pm MST, by calling (866-294-1660).

How does weather affect the performance of my Outside Antenna?
Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective filter to cellular signal.  In
times of heavy precipitation, you may see less performance.
What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know which MHz band my cell phone uses?
The Drive 4G-S works with all major North American cellular providers on the 850 & 1900 MHz frequencies. Traditionally, 850/1900MHz are associated with voice and 3G data; while 700MHz and 1700/2100MHz are associated with 4G data. For more detail see below.



Safety and Recommendations

 WARNING: Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell
phone.

 WARNING: Use only the power supply provided in this package.  Use of a non-weBoost product may damage your
equipment.

 WARNING: To uphold compliance with network protection standards, all active wireless devices must maintain at
least 18” of separation distance from mobile inside antennas, 4’ of separation distance from desktop antennas and 6’ of separation distance from Panel and Dome antennas.
 WARNING:     The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in excess of that range.
WARNING: The outside antenna must be installed no higher than 10 meters (32’9”) above ground.
 RF SAFETY WARNING:   Any antenna used with this device must be located at least 8 inches from all persons.
This is a CONSUMER device.  
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.  

This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate
this equipment.

Mini-Mag

301126 w/ 12.5
RG174 cable- SMA



301113 w/ 12.5
RG174 cable- FME



12” Mag Mount w/ 12.5’ RG174

 311103


 311125


 311128


 311703


 314202


Trucker antenna w/10.5’ RG58

 311101


 311701


Trucker antenna w/13.5’ RG58

 311119


 311133


NMO Antenna’s w/ RG174
Kit 311104-17410
• 800/1900 NMO antenna

 10’ RG174 cable Kit 311112-17410

• 800/1900 NMO antenna


 10’ RG174 cable Kit 314203-17410

• 800/900/1900 NMO antenna


 10’ RG174 cable Kit 311130-5810


 Marine Antenna


 10’ RG58 cable




Glass Mount w/14’ RG58 cable

 311102


 311114 ( Mini Glass Mount)


NMO Antenna’s w/ RG58
Kit 311104-5810
• 800/1900 NMO antenna

 10’ RG58 cable Kit 311112-5810

• 800/1900 NMO antenna


 10’ RG58 cable Kit 314203-5810



 800/900/1900 NMO antenna


 10’ RG58 cable


Outside Fixed Antennas 50 Ohm Outside Antenna Kits
Kit 314453-5825

50 Ohm Pole Mount
Panel Antenna



 25’ RG58 Cable Kit 314411-5825


50 Ohm Wide
Band Directional



 25’ RG58 Cable Kit 301111-5850


 Yagi Directional Antenna


 50’ RG58 Cable Kit 311129-5840


 800 MHz Yagi Directional


 40’ RG58 Cable Kit 311203-5820


 Omni-Directional antenna


 20’ RG58 Cable Kit 311124-5830


 1900MHz Yagi Antenna


 30’ RG58 Cable Kit 314411-40075


50 Ohm Wide
Band Directional



 75’ LMR400 Cable Kit 311203-40020


 Omni-Directional antenna


 20’ LMR400 Cable Kit 301111-400170


Yagi Directional w/ N-Female


 170’ LMR400 Kit 311124-400100


 1900 MHz Yagi Directional


 100’ LMR400 Cable Kit 311129-400100




 800 MHz Yagi Antenna



 100’ LMR400 Cable Kit 314453-40075


50 Ohm Pole Mount
Panel Antenna



 75’ LMR400 Cable



75 Ohm Outside Antenna Kits
Kit 301111-0675

 Yagi Directional Antenna


 75’ RG6 Cable



 N-Male to F-Female adapter Kit 311201-0620


Omni Directional
w/ F-Female




 20’ RG6 Cable Kit 311129-0660


 800 MHz Yagi Directional


 60’ RG6 Cable



 N-Male to F-Female adapter Kit 311124-0650


 1900 MHz Yagi Directional


 50’ RG6 Cable



 N-Male to F-Female adapter Kit 314473-0640


75 Ohm Pole Mount
Panel Antenna




 40’ RG6 Cable Kit 314475-0630


75 Ohm Wide
Band Directional




 30’ RG6 Cable Kit 311141-0620


 75 Ohm Grey Brick Antenna



 20’ RG6 Cable Kit 301111-11140



 Yagi Directional Antenna


 140’ RG11 Cable




 N-Male to F-Female adapter Kit 311201-1120

• Omni Directional
w/ F-Female




 20’ RG11 Cable Kit 311129-11110



 800 MHz Yagi Directional


 110’ RG11 Cable





 N-Male to F-Female adapter Kit 311124-1180


 1900 MHz Yagi Directional


 80’ RG11 Cable





 N-Male to F-Female adapter Kit 314473-1175

• 75 Ohm Pole Mount
Panel Antenna




 75’ RG11 Cable Kit 314475-1175

• 75 Ohm Wide
Band Directional




 75’ RG11 Cable Kit 311141-1120



 75 Ohm Grey Brick Antenna


 20’ RG11 Cable





Signal Booster Specifications

Power output for single cell phone (Uplink) dBm  700MHz Band12/17  700MHz Band13  800MHz  1700MHz  1900MHz  
24.4  23.1  24.9  22.0  22.7  
Power output for single cell phone (Downlink) dBm  700MHz Band12/17  700MHz Band13  800MHz  2100MHz  1900MHz  

 
 
 
 


Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1
minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually
restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s
microprocessor.
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the
device.

2-Year Warranty
weBoost Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials.  Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by weBoost.  weBoost shall, at its option, either repair or replace the product.  weBoost will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.
This warranty does not apply to any Signal Boosters determined by weBoost to have been subjected to misuse, abuse,
neglect, or mishandling that alters or damages physical or electronic properties.
Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.
RMA numbers may be obtained by contacting Customer Support at 866-294-1660.
Disclaimer: The information provided by weBoost is believed to be complete and accurate.  However, no responsibility is assumed by weBoost for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use.
Copyright © 2014 weBoost. All rights reserved.
weBoost products covered by U.S. patent(s) and pending application(s)  


For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.

Regarding weBoost, Wilson Pro, and zBoost Amplifiers:

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.

Please type your cell phone model in the search box at the top to view all available accessories for your phone model

Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.

Copyright Cell-Phone-Accessories.com | HTML Index


BBB Member

Best Service

Authorized Cell Phone Signal Booster Retailer

Cell Phone Signal Booster

Car Charger
Cell Phone Batteries