Wilson AG PRO 70 (Wilson 460105 - Former ... - Click to enlarge.
Wilson AG PRO 70 (Wilson 460105 - Former ... - Click to enlarge.

Wilson AG PRO 70 (New Version Part # 460105 - Formerly 801265)

Availability: Usually ships the same business day

Wilson AG PRO 70 (Wilson 460105 - Formerly 801265)

460105Retail MSRP: $649.99Sale Price: $578.99


We will MATCH or BEAT lowest price offered on most cellular accessories.

For Cell Phone Model: For all phones on any of the following two frequency bands: Band 5: 850 MHz Band 2: 1900 MHz
UPC Code: 811815021971
Cell Phone Category: Cell Phone Signal Booster
Wilson AG PRO 70 (New Version Part # 460105 - Formerly Wilson 801265). The AG Pro 70 Kit has everything you need to ensure your large home or office gets boosted signal from every carrier. With good coverage outside these kits are perfect for areas around 5000 sq. ft.

The AG Pro 70 is a dual-band, installer-friendly cellular signal booster designed to provide a reliable connection in weak signal areas for multiple cell phones and data cards simultaneously.Having an adjustable gain simplifies installation by making antenna placement less critical. It gives an installer greater flexibility to optimize the AG Pro’s gain level to match the installation requirements of the building in which it is installed. The AG Pro 70 also uses RG6 cable (standard satellite / TV coax) making installation even easier as the booster can be connected to pre-run cables in the building.

PRO SERIES INSTALLATION GUIDE is pasted below for your reference. Information may be subject to change - Please refer to the actual guide you receive PRO 70 In-Building SmarTech ® Cellular Signal Boosters providing 70-DB Gain Contents: How Cellular Boosters Work. . . . . . . . . . . . . . . . . .  .  .  .  .  .  .  . 1.  .  .  .  . Inside This Package . . . . . . . . . . . . . . . . . . . . .  .  .  .  . .  .  .  . 2. . . . . .  . . Install Overview. . . . . . . . . . . . . . . . . . . . . .  .  . . .  .  . .  . .  . .  .  .  . 2.  .  .  .  . Installation Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 & 4   Outside Antenna Installation. . . . . . . . . . . . . . . . . . . .  .  .  .  .  . . 5.  .  .  .  . Installing the Inside Panel Antenna(s). . . . . . . . . . . . .  .  .  .  .  .  .  . . .7 .  .  .  . . Installing The Signal Booster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7   Finding The Strongest Signal . . . . . . . . . . . . . . . . .  .  . . . . . .  . . .8 .  . . . . . . Post Install Setup / LCD Light. . . . . . . . . . . . . . . . .  . . . . . . .  .  . .9  .  . . . . . . Warnings and Recommendations. . . . . . . . . . . . . . .  .  .  .  .  .  . .12. .  .  .  .  . Guarantee, Warranty & Specifications . . . . . . . . . . . . . . . Back. Cover.   Appearance of device and accessories may vary. Information provided below is as-is and subject to variation.   Note: This manual contains important safety and operating information. Please read and follow the instructions in manual of purchased kit. Failure to do so could result in damage to your Signal Booster. How a Cellular Booster Improves Indoor Signals weBoost cellular signal booster systems work as follows: an outdoor antenna placed on a building where some cell signal is present, (ideally on a roof or pole), receives and sends that weak signal via coax cable (like used in satellite TV installs) to a signal booster located indoors . That weak signal is amplified by the booster and delivered via coax cable to an inside antenna(s) which rebroadcasts the amplified signal within one or several areas where improved signal is required . Signals from indoor cell device(s) are likewise picked up by the inside antenna(s), amplified by the signal booster and transmitted back to the cell tower via the outside antenna . The improved signals result in reliable cellular connections for indoor users  About Gain and Improved Signal Area The gain (amplification) of a cell booster directly affects the area of improved signal coverage inside a home or building . weBoost boosters are available with different gain ratings so as to better match signal levels at a user’s location, with the user’s expectations . The less signal strength at the outside antenna’s location and/or the greater the coverage need, the more gain will be required and therefore higher unit cost . Conversely, the more signal present outside, the greater the inside coverage area will be . Proper aiming of the outside antenna towards the source of the cell signal is also important . The gains of the outside and inside antenna, though reduced by losses from coax cable lengths, also affect area of improved coverage . Placement of the inside antenna is also a factor as they have directional characteristics . Inside wall materials will also affect indoor coverage area . Another important factor affecting coverage area is inadequate isolation between outside and inside antenna(s) . weBoost boosters are designed to reduce their internal gain in order to prevent any feedback “oscillations” which if unchecked, could affect nearby cell site operation . The LCD status display on the booster is used to determine if a booster is operating at optimal gain for each cellular band . Optimal gain can be achieved by increasing antenna separation, i .e . isolation, until the max gain is indicated . If attainable separation is limited by a building’s layout, gain will suffer . A nearby cell site, even if not providing service to a user, can also cause the booster’s automatic network protection circuitry to reduce gain or even turn off one or more of the booster’s bands so as to prevent signal overload to the nearby site . The display on the booster can also be used to determine if this condition is taking place . Refer to pages 9-11 for explanation of the booster status display.

Inside the Package Note: Kits may contain different accessories. To purchase Expansion Kits call Sales Department at:   Signal Wide Band Directional Wide Band Panel Antenna 2’ RG11 Cable AC/DC Lightning Surge     Antenna 75’ RG11 Cable 50’ RG11 Cable (951122) Power Supply Protector   Booster (314475-1175) (311155-1150)   12V/3A (859900) (859992)    For additional antenna options see pages 13 & 14. Install Overview Refer to Installation Diagram on page 3 & 4.  Contact Support Team with any questions at . • Select a location on the roof or outside of the building to install the outside antenna. Refer to pages 3 & 5. • Select a location to install the Signal Booster that is away from excessive heat, direct sunlight or moisture, and has adequate ventilation. Airtight enclosures are not recommended. Booster should be as close to the outside antenna as possible in order to minimize losses from cable length to outside antenna. • Connect the cable from the outside antenna to the signal booster’s “outside antenna” connector. Refer to page 6 for more information on running cable. Lightning Surge Protection is recommended for all in-building installations. Refer to pages 3 & 6. • Select a location for the inside antenna. Try to choose a position in the center of the area needing improved signal . Keep in mind that proper inside antenna to outside antenna isolation is necessary for the system to function properly. This may require as much as 50 to 75 feet of horizontal separation from the outside antenna. Vertical separation also helps increase isolation. Alternate means of isolation are possible . If physical separation is not possible, please contact Tech Support at for suggestions on alternate methods to achieve isolation . • Connect the cable from the inside antenna to the signal booster’s “inside antenna” connector. Refer to page 6 for more information on running cable. Keep cable runs as short as possible to reduce signal loss in the system. • Before powering up the signal booster, verify that both the outside antenna and the inside antenna are connected correctly, and check that all connections are tight. Refer to page 9. Note: Be careful when plugging the connectors in so as not to bend the center pins on the connectors.  • Power on the signal booster by plugging in the included power supply. If the lights are not green, please refer to pages 9-11. 

Installation Diagram Inside Insert Included. Outside Antenna  (Wide Band Directional Antenna shown) Spacing Critical Note: A weBoost Lightning Surge Protector (859992) is recommendedfor all building installations. Make sure the protector is installed outside the building at point of entry connected to a suitable ground and in line between the Outside Antenna and the Signal Booster. Inside Antenna Preferred Method: Place the Inside Antenna in the ceiling facing down for the best coverage. Power Supply Surge Protector Power Strip

    .   Optional Splitter 2-way or 3-way, when using multiple inside antennas for increased coverage Optional Inside Antenna for added coverage Signal Booster


      Selecting a Location for the Outside Antenna Wide Band Antenna Cell Tower The outside antenna must be mounted at a location outside of the home or building, where the strongest cell signal is present . This can be accomplished by using the weBoost Signal Meter . Alternatively, a cell phone in test mode* can be used for finding the area around the building with the strongest signal . Mount the outside antenna as high as possible facing towards the suspected location of the cell tower and pointing away from the expected location of the inside antenna(s). *Outside Antenna Installation The antenna should be mounted as shown in Figure 1. The mounting bracket, included with antenna, is adjustable and will accommodate pipe diameters from 1.25 inches to 2 inches (pipe sold separately #901117). Mount the antenna so that there is at least 3 feet of clearance in all directions around it. Make sure the antenna is not pointing across your own roof or at the inside antenna as this will cause the cell site protection circuitry to shut down the signal booster. CORRECT INSTALLATION INCORRECT INSTALLATION Point antennas away from each other Never point antennas toward each other

Inside Panel   Inside Panel Outdoor     Outdoor   Antenna   Antenna   Antenna       Antenna      

Signal Booster Signal Booster   Figure 1 Figure 2


    .   Lightning Surge Protector (859992) To Outside Antenna Installing Lightning Protection  Warning: Lightning protection is recommended for all installations (#859992-75 Ohm, shown below). Take extreme care to ensure that neither you nor the antenna comes near any electric power lines. Install the Lightning Surge Protector (LSP) outside, in line with the coax cable from the outside antenna, near where the coax cable from the outside antenna will enter the building. Connect the Outside antenna cable to one of the connectors of the surge protector. Connect the other connector on the LSP to the cable entering the building. Ensure the LSP is properly grounded as close to the LSP as possible (ground wire not included). Signal Booster To Inside Antenna Ground Wire Exterior wall of building or home  Surge Protector Power Strip Running Outside Antenna Cable If you are mounting the outside antenna to the outside wall of your home or building, the simplest way is to run the cable on the outside of the wall and attach it to the exterior of your home or office. Then drill a hole through the wall where you want the cable to appear on the inside of the building. Before drilling, make sure that there are no electrical outlets, sewer or water pipes, or electrical wiring in the wall that you are about to drill through as this could potentially harm you or damage the building. Note: Existing TV cables already being used for another purpose can not be shared with the cell booster installation. After drilling the required hole, run the cable through and seal it with cable bushings or a silicone-type sealant to enclose the hole that you have created. In some instances, it may be possible to run the cable up into the fascia of the attic overhang. In this circumstance, the cable will be accessible in the attic for further routing.


    Installing the Inside Panel Antenna(s) Select a location for the inside antenna, preferably in the center of where the signal needs to be amplified. A minimum separation distance of 20 vertical feet and or 50 horizontal feet between the inside and outside antenna(s) may be necessary in order to achieve full booster gain and therefore maximum indoor coverage. If the amplifier can not be set to maximum gain as explained on page 10, you may need as much as 75 feet of horizontal separation, or mechanical isolation, between inside and outside antennas. Refer to installation diagram on pages 3 & 4. Inside Antenna  Ceiling Ceiling Rafters Drywall Some installations requiring signal improvement in far areas of larger homes or structures may require multiple inside antennas and splitter(s). For example if signal is improved in most areas of a structure, but yet there is weak signal In another area, the signal from the booster can be split to two or more separate indoor antennas by using a splitter (sold separately). Refer to the configuration on pages 3 & 4.   Additional Inside Panel Splitter Options:     Antenna       (311155-0630, sold separately)       Multiple mounting options       available 2-way             For additional antenna options (859993) 4-way   see pages 13 & 14 3-way       (859994) (859981)      Installing the Signal Booster Select a location for the signal booster which is away from excessive heat, direct sunlight, moisture and is not subject to high temperatures. Do not place the signal booster in an air-tight enclosure. Recommended installation locations for in-building signal boosters are in a closet or on a shelf where power is available. Attic installations may expose the booster to high heat.


    .   Note: Do not install in areas subject to temperatures in excess of 150 °F. Note: Maintain at least 6 inches of clearance from surrounding objects. Be carefulwhen plugging the connector in so as not to damage the center pins on the connectors.       Run the outside antenna cable to the signal booster and attach it to the connector labeled “Outside Antenna” on the signal booster. Run the inside antenna cable to the signal booster and attach it to the connector labeled “Inside Antenna” on the signal   booster.       Note: In order to abide by FCC regulations, cable lengths and antennas shipped as a kitwith each booster must be used and not cut and shortened. Contact our tech support for cable kits to be used in situations requiring long cable runs.       Note: It is very important to power your signal booster using a surge protected ACpower strip with at least a 1000 Joule rating. Failure to do this will void       your warranty in the event of a power surge or lightning strike       Finding the Strongest Signal       .hen installing your signal booster’s outside antenna, aiming it towards the best signal source from your carrier is important . The best way of getting the stronges signal is to use the weBoost Signal Meter and accessory Directional antenna (see outside antenna kit options on page 14), an alternate way is to have one person on the roof to rotate the outside antenna, which is connected to the signal booster .       Turn the outside antenna about 45 degrees at a time, while the second person, inside the building, is watching the signal strength on a signal meter (preferred) or a phone in test mode . This allows you to read the signal strength from the cell tower . The phone should be in the test mode so the actual signal strength can be read, as bars are not the most accurate . Go to for help in finding the test mode for your phone . Always make sure theperson inside the building gives the signal strength time to register on the phone (at least 30 seconds for phone to update the signal reading) .       Cell Signal Signal Strength Graph


Outside 0 dBm-50 dBm    -60 dBm -70 dBm-80 dBm -90 dBm   -100dBm -110dBm   Antenna     Signal readings usually appear as a negative number (for example, -86). The closer the number to zero, the stronger the signal (see Signal Srength Graph above).  

8     Post Install Setup       The Pro Series booster is designed with advanced internal programming which allows it to automatically adjust itself for a variety of conditions and still boost weak signals. After completing the amplifier installation, the LCD display and push button on the lower panel of the Pro Series booster is used to verify the final gain that the booster adjusted itself to produce after antennas have been placed. The display can also be used (if necessary) to re-adjust antennas so the booster can produce maximum gain and therefore, coverage. The LCD screen will show status for each band and inform the installer if any bands may have had their gain reduced by the booster’s internal programming. In addition, an indicator light on the booster”s upper panel will help diagnose the overall status of the booster by glowing in different colors. This will be covered in the following page.       Understanding the LCD Screen       1. Four bands can be individually selected:       The 700 MHz LTE Bands (B12/17 and B13) A700         AOK             The 800 MHz Band The 1900 MHz 1700/2100 MHz – Cell Band – PCS Band – AWS Band             A800   APCS   AAWS   AOK   AOK   AOK                         The single “BAND SELECT” button is used to scroll the display through the four cellular bands in order to verify that each band is functioning properly. This is typically done several times during the installation and setup process in order to identify and eliminate any cell site proximity gain reduction (“OVL” display) and/or oscillation detection (“OSC” display) which may have been commanded by the booster’s network protection circuitry, as will be described below. Additionally, an asterisk (located next to the band selected) will flash if one or more bands have been turned down/off by the boosters control circuitry due to strong nearby cell site signal overload or oscillation from antennas being too close.           9

    .         Understanding the Upper Panel Indicator Light       As the LCD display is being toggled through the four cellular bands, the upper indicator light (power) will glow green, orange, red, or a combination of colors on each selected band, depending on how the booster is functioning on each band as explained below.       Green indicates the unit is powered, at full gain and working properly.       Red indicates the booster has shut down due to extreme oscillation (feedback).       Orange indicates the booster has shut down due to extreme signal overload. Thisis caused from being too close to a cell tower.       There are also two unique light functions – green with an alternating red, and green with an alternating orange. Both of these indicate the booster is working,though at a reduced gain.       IMPORTANT NOTE: Reduced gain decreases the inside coverage area. If the amountof coverage area is sufficient, your installation is complete.       Flashing Green and Orange indicates the booster has detected overload froma nearby cell site and has automatically reduced its gain in order to continue operating without affecting the nearby site.       Flashing Green and Red indicates the booster has detected feedback oscillationusually caused by incorrect antenna placement (antennas too close) and has automatically reduced its gain so as to prevent any cell site interference.   Note: Both of the above can occur, but the booster will choose the light option that relates to the greatest reduction in gain.   Fixing Red Light Issues   If one or more lights on the Signal Booster are red: 1. Make sure all connections are tight.      


          • If the coverage area is not large enough with a reduced gain and alternating green and red lights, you need to increase the distance between the outside antenna and the inside antenna by moving them horizontally and/or vertically farther apart. After doing so, reset the booster by unplugging the power supply and then plugging it back in. If the light is green after separating the antennas, you have attained the maximum coverage.        • If your coverage area is still too small after separating the antennas contact the Support Team for assistance: .        Fixing Orange Light Issues       If the indicator light is orange (reduced gain) on one or more bands:       • If the coverage area is not large enough with this reduced gain condition, it will be necessary to turn the outside antenna away from the strong nearby cellular signal in small increments until the light turns green. If the Signal Booster will not respond, relocation of the outside antenna may be required.        2 . If the light remainsorange the coverage area is still too small, contact the    

      About weBoost: It has been a leader in the wireless communications industry for over 10 years . The company provides Signal Boosters, antennas and related components that significantly improve cellular telephone signal reception and transmission in a wide variety of applications, mobile (marine, RV, vehicles) and in-building (home, office, machine to machine) .   With extensive experience in antenna and Signal Booster research and design, the manufacturers engineering team uses a state-of-the-art testing laboratory, including an anechoic chamber and network analyzers, to fine-tune antenna designs and performance . For its Signal Boosters, they use a double electrically shielded RF enclosure and cell tower simulators for compliance testing .   Signal Boosters feature patented SmarTech  that enables them to automatically adjust their power based on cell tower requirements. By detecting and preventing oscillation (feedback), signal overload and interference with other users, these SmarTech ® Signal Boosters improve network cell phone areas without compromising carrier systems.       All products are engineered and assembled in the manufacturers 100,000 square-foot headquarters .       11

    .         Warnings and Recommendations        Warning: The outside antenna must always be located so the back or side points to the inside antenna. Never point the front of the outside antenna toward the inside antenna – this is to prevent booster oscillation shut down.       .Warning: Use only the correct manufacturers power supply . Use of a non-Wilson Electronics product may damage your equipment .        Warning: RF Safety: Any Inside Antenna used with this device must be located at least 8 inches from all persons.        Warning: The Outside Antenna must be installed no higher than 10 meters (32’9”) above ground.        Warning: To uphold compliance with network protection standards, all active wireless devices must maintain at least 6 feet of separation from the panel and dome antennas, and 4 feet from desktop antennas.       This is a CONSUMER device.       BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless providerand have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.       You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.       You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.       WARNING. E911 location information may not be provided or may be inaccuratefor calls served by using this device.       Note: Dome Antennas are not recommended with these Signal Booster(s).       Note: For a complete list of antennas and cables approved for use with theseboosters see pages 15 & 16.       This device complies with Part 15 of FCC rules . Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation . Changes or modifications not expressly approved by manufacturer could void the authority to operate this equipment .          


          Inside Antenna Options For Multi Antenna Installation       (contact Technical Support for assistance)       Kit 309900-50N Kit 311155-0630   • 2- Wall Panel antennas • 75 Ohm Wall mount Panel Antenna   • 1- 50 ohm 3-Way Splitter • 30’ RG6 Cable       Kit 311135-5820   Kit 309905-50N • 50 Ohm Wall mount Panel Antenna   • 3 - Wall Panel Antennas • 20’ RG58 Cable   • 3 - 2-Way 50 Ohm Splitters Kit 311135-40060           Kit 309902-75F • 50 Ohm Wall mount Panel Antenna   • 2 - Wall Panel Antennas • 60’ 400 Cable   • 1 - 3-Way 75 Ohm Splitter Kit 311155-40060           Kit 309903-75F • 75 Ohm Wall mount Panel Antenna   • 3 - Wall Panel Antennas • 60’ 400 Cable   • 3 - 2-Way 75Ohm Splitters           Kit 309904-75F       • 1 – Wall Panel Antenna        • 1- 2-Way 75 Ohm Splitter        13

    .         Outside Antenna Options For Multi Antenna Installation       (contact Technical Support for assistance)           Kit 301111-0675       • Yagi Directional Antenna        • 75’ RG6 Cable        • N-Male to F-Female adapter        Kit 311201-0620       • Omni Directional w/ F-Female        • 20’ RG6 Cable        Kit 311124-0660       • 1900 MHz Yagi Directional        • 60’ RG6 Cable        • N-Male to F-Female adapter        Kit 311129-0650       • 800 MHz Yagi Directional        • 50’ RG6 Cable        • N-Male to F-Female adapter        Kit 314473 -0640       • 75 Ohm Pole Mount Panel Antenna        • 40’ RG6 Cable        Kit 314475 – 0630       • 75 Ohm Wide Band Directional        • 30’ RG6 Cable        Kit 311141 - 0620       • 75 Ohm Grey Brick Antenna        • 20’ RG6 Cable        Kit 314411-40075       • 50 Ohm Wide Band Directional        • 75’ 400 Cable        Kit 311203-40020       • Omni-Directional Antenna       • 20’ 400 Cable Kit 301111-400170  • Yagi Directional w/ N-Female        • 170’ 400        Kit 311129-400100       • 800 MHz Yagi Antenna        • 100’ 400 Cable        Kit 314453-40075       • 50 Ohm Pole Mount Panel Antenna        • 75’  Cable  Kit 314453-5825 • 50 Ohm Pole Mount Panel Antenna  • 25’ RG58 Cable  Kit 314411-5825 • 50 Ohm Wide Band Directional  • 25’ RG58 Cable  Kit 301111-5850 • Yagi Directional Antenna  • 50’ RG58 Cable  Kit 311124 – 5840 • 1900 MHz Yagi Directional  • 40’ RG58 Cable  Kit 311203-5820 • Omni-Directional Antenna  • 20’ RG58 Cable  Kit 311129-5830 • 800 MHz Yagi Antenna  • 30’ RG58 Cable   Mini-Mag - 301126 • 12.5 RG174 Cable  


     30-Day Money-Back Guarantee All products are protected by 60-day money-back guarantee . If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase . 3-Year Warranty  Signal Boosters are warranted for three (3) years against defects in workmanship and/or materials . Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase .  Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by weBoost . weBoost shall, at its option, either repair or replace the product . weBoost will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U. S.  This warranty does not apply to any Signal Booster determined by weBoost to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties.  Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty. RMA numbers may be obtained by contacting Technical Support at   Disclaimer : The information provided byweBoostis believed to be complete and accurate . However, noresponsibility is assumed by weBoost for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use . Copyright © 2015. . All rights reserved . Signal Booster Specifications          PRO 70   Model Number     461034, 462034, 463034     FCC ID     PWO460004     Antenna connectors     F-Female     Antenna Impedance     75 Ohms     Dimensions   8.875 x 6.0 x 1.5 inch (22.5 x 15.2 x 3.8 cm)   Weight     2.8 lbs (1.270 kg)     Frequency 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz     700 MHz 700 MHz 800 MHz 1900 MHz 1700/2100 MHz 3Power output for single cell phone (dBm) Band 12/17 Band 13       Uplink 23.2 23.8 25.2 22.1 22.5 Downlink -0.4 -2.1 -2.0 -1.4 0.9 Noise Figure (typical downlink/uplink)     7 dB nominal     Isolation     > 90 dB     Power Requirements   110-240 V AC, 50-60 Hz, 20 W   Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.

Do Wilson Cell Phone Signal Boosters Work?

For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.

Regarding weBoost, Wilson Pro, and zBoost Amplifiers:

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.

Please type your cell phone model in the search box at the top to view all available accessories for your phone model

Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.

Copyright | HTML Index

BBB Member

Best Service

Authorized Cell Phone Signal Booster Retailer

Cell Phone Signal Booster

Car Charger
Cell Phone Batteries