Search 

Wilson Sleek Five-Band Cradle Signal Boo ... - Click to enlarge.
Wilson Sleek Five-Band Cradle Signal Boo ... - Click to enlarge.

Wilson Sleek 460107 4G LTE Five-Band Cradle Signal Booster


Availability: Usually ships the same business day

Wilson Sleek Five-Band Cradle Signal Booster 2G / 3G / 4G LTE (Wilson 460107 - Formerly 813426)

460107Retail MSRP: $199.99Sale Price: $179.99

Quantity:

We will MATCH or BEAT lowest price offered on most cellular accessories.

For Cell Phone Model: For all models operating on following frequency bands: Band 12: 700 MHz, Band 13: 700 MHz, Band 5: 850 MHz, Band 4: 1700/2100 MHz, Band 25: 1900 MHz
UPC Code: 811815021902
Cell Phone Category: Cell Phone Signal Booster
Wilson Sleek 2G 3G 4G LTE Five-Band Cradle Signal Booster (New Version Part # 460107 - Formerly Wilson 813426)

The Sleek 4G is for those who need enhanced coverage in their vehicle for devices operating on the 4G networks of any major North American cell service provider.The Sleek 4G also amplifies pre-existing signals, thus providing the user a strong, reliable signal even where 4G and LTE services are unavailable.

● Boosts 4G signals on all major carrier networks in North America

● Enhances both voice and data communications

● Provides a strong, reliable signal in weak signal areas

● Faster, cleaner 3G & 4G data transfers

● More than 20 times the power of your cell phone alone

The Wilson Electronics Sleek® 4G cell phone signal booster improves coverage – including 4G, 3G, and 2G data downloads – for subscribers of all U.S. cellular networks (except Clearwire). For specific information about frequency bands, see below. By also boosting all major carriers’ legacy voice and data services, the Sleek 4G provides the user a strong, reliable signal, even where 4G services are unavailable.

The Wilson Sleek 4G helps users reduce dropped calls, increase data rates in weak signal areas and originate calls from those dreaded “dead spots.” The Sleek and its outside antenna increases any phone’s output power to the cell tower while improving its ability to detect signals it normally would not, keeping the user more reliably connected. Designed for simple set up, the Sleek can be easily moved from vehicle to vehicle. Built into the Sleek cradle is a Wilson tried and tested bidirectional signal booster and battery charging port. The cradle is ideal for hands free operation in conjunction with a user’s hands free headset or Bluetooth device. The Sleek 4G has an MSRP of $179.99.

Do Wilson Cell Phone Signal Boosters Work?


For Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" are only available for installation outside United States. If purchasing part numbers which do not begin with "46" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.

Regarding Wilson Amplifiers:

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.

In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website.


Wilson 460107 Sleek Installation Instruction Manual By The Manufacturer:


image


image



Sleek® 4G Cellular Signal Booster 460107


image

Wilson Tech Support 866-­294-­1660

!

IT IS VERY IMPORTANT TO POWER YOUR SIGNAL BOOSTER USING A SURGE PROTECTED AC POWER

STRIP WITH AT LEAST A 1000 JOULE RATING.

FAILURE TO DO THIS WILL VOID YOUR WARRANTY IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE.

!

THE SIGNAL BOOSTER UNIT IS DESIGNED FOR USE IN AN INDOOR, TEMPERATURE-­ CONTROLLED ENVIRONMENT (LESS THAN 150 DEGREES FAHRENHEIT). IT IS

NOT INTENDED FOR USE IN ATTICS OR SIMILAR LOCATIONS SUBJECT TO TEMPERATURES IN EXCESS OF 150°F.


image

Contents

Package Contents 2

Installation Options 3

Option 1: Vehicle Installation 3

Option 2: In-­Building Installation 4

Adjusting the Sleek 4G Arms 5

Troubleshooting 5

Understanding the Sleek 4G Lights 5

Additional FAQ 6

Optional Accessories 6

Safety and Recommendations 7

Guarantee and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Signal Booster Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover


image


Sleek® 4G operates on (Band 12/17, 13) 700 / 800 / AWS (1700 / 2100) / (Band 2) 1900 MHz Model #460007 FCC: PWO460007

FCC requires to never use the cell phone in the cradle next to your ear.


image

image

image

Inside this Package



Sleek 4G®


Mini-­Magnet Mount Antenna

(301126)


DC Plug-­In Power Supply

image

& USB cable

(859910)

image

Vehicle Dash Adhesive Mounting Bracket


Adjustable Arms


image

image

image

image

image

image

Optional Accessories



AC Power Supply

(859969)*


Antenna Window Mount (Used with Mini-­Magnet Mount Antenna) (901128)*

*Case included


Adjustable Desk Mount (901137)*


Mobile Power Supply

(859984)


Gooseneck Suction Cup Cradle Mount (901120)


Cup Holder Cradle Mount (901130)

Vehicle Dash Mounting Kit

-­Rugged/Screw Mount-­

-­Adhesive Mount-­

-­Vent Clip Mount-­

(901134)

(included in some kits)

Appearance of device and accessories may vary. (This product is not marketed by Verizon Wireless or AT&T).


  1. NeedWilson Electronics Tech Support 866-­294-­1660

    Installation Options

    Option 1: Vehicle Installation

    1. Attach the Mounting Bracket to the vehicle’s dashboard.

      • Clean the area where the bracket is to be mounted with the alcohol wipe included. Allow the area to dry.

      • Peel the backing to expose the adhesive and press the bracket onto the desired location on the dashboard. NOTE: Be sure the tab is positioned vertically.

        image


      • Allow the adhesive to cure for 24 hours before you attach the Sleek 4G (Step 4).

    2. Install the Outside Antenna. Select a location on top of the car that is:

      • Near the center of the vehicle's roof.

      • At least 12 inches from any other

        antennas.

      • Free of obstructions.

      • At least 6 inches from any windows

        (including sunroofs).

        image


      • At least 8 inches from any people.

        The Outside Antenna must be installed vertically.

    3. Run the Outside Antenna cable into the car.

      The cable is strong enough that it may be shut in most vehicle doors without damaging the cable. For a cleaner look, carefully pull down the door seal, run the cable under the seal, and push the seal back into place. This method reduces wear on the cable as the door opens and closes.


      image


    4. Attach the Sleek 4G to the Mounting Bracket. After waiting 24 hours for the adhesive on the bracket to cure, attach the Sleek 4G by aligning the rectangular hole on the back of the Sleek 4G with the tab on the Mounting Bracket, grasping the sides of the Sleek 4G, and sliding it downward approximately ¼ inch into place.

      The Mounting Bracket is designed to swivel for more convenient viewing angles. Once the Sleek 4G is in place, you can adjust the angle of the bracket by loosening the knurled nut, applying gentle pressure to the top or bottom of the Sleek 4G, and then tightening the nut when the desired angle is achieved.

      image


    5. Attach the antenna to the Sleek 4G. Connect the cable from the Outside Antenna to the antenna connector on the bottom of the Sleek 4G. Do NOT plug in the power supply (next step) until the Outside Antenna cable is connected to the Sleek 4G.

      image


      Note: The Sleek 4G has a convenient USB charging port located on the right side of your booster. This port allows for charging your phone or device, using your existing cable.


      image

      image

  2. NeedWilson Technical Support 866-­294-­1660

    1. Power up your Sleek 4G. Connect the power cable to the mini-­USB port on the bottom of the Sleek 4G. Then insert the adapter into the vehicle 12V DC power source. Use only the supplied Wilson Electronics power supply. While the Sleek 4G may remain on, leaving the Sleek 4G on in a vehicle when it is not running may discharge the battery in a day or two. Also note that some 12V DC power sources are shut down when the vehicle ignition is turned to off. Use a Bluetooth headset, wired hands-­free device or speakerphone for talking on the phone.

    image


    Option 2: In-­Building Installation

    Note: Home Ofice Accessory Kit sold separately

    1. Install the Outside Antenna to a window. For best results:

      • Select a window on the side of the building where you get the strongest cell signal.

      • Attach the suction cup bracket (sold separately) to the inside of a window so the cable will reach the location of the Mounting Bracket and Sleek 4G. Place the bracket as high on the window as possible.

        image


        NOTE: Many newer energy effcient dual pane windows use a metal coating that may decrease the strength of a cellular signal, reducing the effectiveness of the Sleek 4G. If you have dual pane windows, consider a Wilson Electronics signal boost product that

        provides an option for mounting an antenna on an outside wall or roof of a building.

      • With the bracket in place, attach the magnet base of the antenna to the lat surface of the bracket. The antenna must be mounted vertically for the best signal.

        image


    2. Install the Mounting Bracket and Sleek 4G.

      image


      Put your Sleek 4G in the Mounting Bracket (see instructions under Vehicle Installation) and place it in a convenient location such as a desk or table top in the room where you will use the phone. The location should be at least three feet from the Outside Antenna to avoid oscillation (feedback). Your cell phone must be in the cradle for the Sleek 4G to amplify the signal. Use a Bluetooth headset, wired hands-­ free device or speakerphone for talking on the phone.

    3. Attach the antenna to the Sleek 4G. Connect the cable from the Outside Antenna to the antenna connector on the bottom of the Sleek 4G. Do NOT plug in the power supply (next step) until the Outside Antenna cable is connected to the Sleek 4G.

      image


    4. Power up your Sleek 4G. Connect the power cable to the mini-­USB port on the bottom of the Sleek 4G. Then insert the adapter and power it on. Use only the supplied Wilson Electronics power supply.


      image

      image

  3. NeedTechnical Support 866-­294-­1660

    image


    Adjusting the Sleek 4G Arms

    Various sized arms are included with your Sleek 4G. These provide you with options to customize the Sleek 4G to ft virtually any cell phone.

      • To change arms, gently lift the arm upward until the arm slides free from the Sleek 4G.


        image


      • To reposition arms, move the arm above a different slot on the Sleek 4G and gently slide the arm down until the arm is frmly in place.


    image


    Troubleshooting

    Understanding the Sleek 4G Light

    The light on the side of the Sleek 4G indicates whether the system is working or if there are problems. Take the following steps based on the indicator light color when using the Sleek 4G.


    image

    Light off: If the light is not on:

    Check connections on the power supply to see that it is frmly plugged into both the Sleek 4G and the power source.

    If using a DC power supply in your vehicle, ensure the power supply is properly inserted. Then check the 12 volt power from the car socket and the fuse. Replace the fuse if necessary.

    If using a power strip in a building, ensure the power strip is plugged in and turned on and that power is coming from the outlet.


    Red light: A red light indicates the Sleek 4G has powered down to protect the cell tower. Separation between the Sleek 4G and the Outside Antenna is important to prevent oscillation (feedback), similar to when a microphone is too close to a speaker. When oscillation occurs, the Sleek 4G shuts down in order to prevent interference in the cell tower.

    If the light is red, move the Outside Antenna farther away from the Sleek 4G. On a vehicle, that usually means moving it farther toward the back of the car. Remember to keep the antenna at least 6 inches from any window or sunroof.

    In an offce, move the location of the Sleek 4G farther from the window where the antenna is mounted. Once you have separated the Outside Antenna and the Sleek 4G, reset the Sleek 4G by disconnecting the power and then reconnecting the power supply. If the light is green, the Sleek 4G is working properly. If the red light is still on, move the Outside Antenna farther away and repeat the process.

    Green light: A green light indicates the Sleek 4G is working properly.


    image

    image

  4. NeedTech Support by Wilson at: 1-866-­294-­1660

Additional FAQ:

What hours can I contact tech support?

Technical Support can be reached from 7:00am to 6:00pm MST, by calling (866-­294-­1660).

How does weather affect the performance of my Outside Antenna?

Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective flter to cellular signal. In times of

heavy precipitation, you may see less performance.

What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know which MHz band my cell phone uses?

The Sleek 4G works with all major North American cellular providers on the 850 & 1900 MHz frequencies. Traditionally, 850/1900MHz are associated with voice and 3G data;; while 700MHz and 1700/2100MHz are associated with 4G data. For more detail see below.

United States Carrier Frequency Use

service provider in a specifc geographical location.


Mobile Antennas

image

Mini-­Mag

• 301126 w/ 12.5 RG174 cable- SMA

• 301113 w/ 12.5 RG174 cable- FME

12” Mag Mount w/ 12.5’ RG174

• 311103

• 311125

• 311128

• 311703

Trucker antenna w/10.5’ RG58

• 311101

• 311701

Trucker antenna w/13.5’ RG58

• 311119

• 311133

NMO Antenna’s w/ RG174

Kit 311104-­17410

  • 800/1900 NMO antenna

  • 10' RG174 cable

    Kit 311112-­17410

  • 800/1900 NMO antenna

  • 10' RG174 cable

    Kit 314203-­17410

    • 800/900/1900 NMO antenna

  • 10' RG174 cable

    NMO Antenna’s w/ RG174

    Kit 311130-­5810

  • Marine Antenna

  • 10' RG58 cable

    Glass Mount w/14’ RG58 cable

    • 311102

  • 311114 ( Mini Glass Mount)

    NMO Antenna’s w/ RG58

    Kit 311104-­5810

  • 800/1900 NMO antenna

  • 10' RG58 cable

Kit 311112-­5810

  • 800/1900 NMO antenna

  • 10' RG58 cable

    Kit 314203-­5810

    • 800/900/1900 NMO antenna

  • 10' RG58 cable

Outside Fixed Antennas

50 Ohm Outside Antenna Kits

Kit 314453-­5825

  • 50 Ohm Pole Mount Panel Antenna

  • 25' RG58 Cable

    Kit 314411-­5825

  • 50 Ohm Wide Band Directional

  • 25' RG58 Cable

    Kit 301111-­5850

  • Yagi Directional Antenna

  • 50' RG58 Cable

    Kit 311124-­5840

  • 1900 MHz Yagi Directional

  • 40' RG58 Cable

    Kit 311203-­5820

  • Omni-Directional antenna

  • 20' RG58 Cable

    Kit 311129-­5830

  • 800 MHz Yagi Antenna

  • 30' RG58 Cable

    Kit 314411-­40075

  • 50 Ohm Wide Band Directional

  • 75' LMR400 Cable

    Kit 311203-­40020

  • Omni-Directional antenna

  • 20' LMR400 Cable

    Kit 301111-­400170

  • Yagi Directional w/ N-Female

    • 170' LMR400


    Kit 311124-­400100

  • 1900 MHz Yagi Directional

  • 100' LMR400 Cable

    Kit 311129-­400100

  • 800 MHz Yagi Antenna

  • 100' LMR400 Cable

    Kit 314453-­40075

  • 50 Ohm Pole Mount Panel Antenna

  • 75' LMR400 Cable


75 Ohm Outside Antenna Kits

Kit 301111-­0675

  • Yagi Directional Antenna

  • 75' RG6 Cable

  • N-Male to F-Female adapter

    Kit 311201-­0620

  • Omni Directional w/ F-Female

  • 20' RG6 Cable

    Kit 311124-­0660

  • 1900 MHz Yagi Directional

  • 60' RG6 Cable

  • N-Male to F-Female adapter

    Kit 311129-­0650

  • 800 MHz Yagi Directional

  • 50' RG6 Cable

  • N-Male to F-Female adapter

    Kit 314473-­0640

  • 75 Ohm Pole Mount Panel Antenna

  • 40' RG6 Cable

    Kit 314475-­0630

  • 75 Ohm Wide Band Directional

  • 30' RG6 Cable

    Kit 311141-­0620

  • 75 Ohm Grey Brick Antenna

  • 20' RG6 Cable

    Kit 301111-­11140

  • Yagi Directional Antenna

  • 140' RG11 Cable

  • N-Male to F-Female adapter

    Kit 311201-­1120

  • Omni Directional w/ F-Female

  • 20' RG11 Cable

    Kit 311124-­11110

  • 1900 MHz Yagi Directional

  • 110' RG11 Cable

  • N-Male to F-Female adapter

    Kit 311129-­1180

  • 800 MHz Yagi Directional

  • 80' RG11 Cable

  • N-Male to F-Female adapter

    Kit 314473-­1175

  • 75 Ohm Pole Mount Panel Antenna

  • 75' RG11 Cable

    Kit 314475-­1175

  • 75 Ohm Wide Band Directional

  • 75' RG11 Cable

    Kit 311141-­1120

  • 75 Ohm Grey Brick Antenna

  • 20' RG11 Cable


image

image

6

Safety and Recommendations


image WARNING: Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone.

image WARNING: Use only the power supply provided in this package. Use of a non-­Wilson Electronics product may damage your equipment.


image WARNING: To uphold compliance with network protection standards, all active wireless devices must maintain at least 18” of separation distance from mobile inside antennas, 4’ of separation distance from desktop antennas and 6’ of separation distance from Panel and Dome antennas.


image WARNING: The Signal Booster unit is designed for use in an indoor, temperature-­controlled environment (less than 150 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in excess of that range.


image

image RF SAFETY WARNING: Any antenna used with this device must be located at least 8 inches from all persons.


This is a CONSUMER device.


BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.

You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.

You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.


This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Wilson Electronics could void the authority to operate this equipment.


image

image

7

30-­Day Money-­Back Guarantee


All Wilson Electronics products are protected by Wilson Electronics 30-­day money-­back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase.

2-­Year Warranty


Wilson Electronics Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.

Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.

This warranty does not apply to any Signal Boosters determined by Wilson Electronics to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties.

Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty. RMA numbers may be obtained by contacting Technical Support at 866-­294-­1660.


image

Signal Booster Specifications


Sleek 4G

Model Number

460007

Connectors

SMA-­Female

Antenna Impedance

50 Ohms

Frequency

698-­746 MHz, 746-­787 MHz, 824-­894 MHz, 1850-­1990 MHz, 1710-­1755/2110-­2155 MHz

3Power output for single cell phone (dB

m)


Uplink

700 MHz Band 12 700 MHz Band 13 800 MHz 1900 MHz 1700 MHz


24.4 23.1 24.9 22.7 22.0

3Power output for single cell phone (dB

m)


Downlink

700 MHz Band 12 700 MHz Band 13 800 MHz 1900 MHz 2100 MHz


-­26.0 -­27.8 -­27.3 -­26.8 -­28.6

Noise Figure (typical downlink/uplink)

3 dB nominal

Isolation

> 40 dB

Power Requirements

5.5 V 2 A

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.


Disclaimer: The information provided by Wilson Electronics, LLC is believed to be complete and accurate. However, no responsibility is assumed by Wilson Electronics, LLC for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use.


image

Copyright © 2014 Wilson Electronics, LLC All rights reserved.

U.S. Patent Nos.– 7,221,967;; 7,729,669;; 7,486,929;; 7,409,186;; 7,684,838;; 7,783,318;; 8,473,018;; 8,583,034;; 8,583,033


image

image

3301 East Deseret Drive, St. George, UT 84790

phone: 866-­294-­1660 local: 435-­673-­5021 fax: 435-­656-­2432

image

111284_Rev01_03.17.14




Please type your cell phone model in the search box at the top to view all available accessories for your phone model

Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.

Copyright Cell-Phone-Accessories.com | HTML Index




BBB Member

Best Service

Authorized Cell Phone Signal Booster Retailer

Cell Phone Signal Booster

Car Charger
Cell Phone Batteries