Wilson Pro 4000R Rack Mounted Commercial Signal Booster
|Wilson Pro 4000R Commercial Signal Booster (Wilson 460231). This Commercial-Grade Cell Phone Signal Booster Boosts up to 100,000 sq. ft. It is a rack mount signal booster making installation easier, cheaper, faster.|
Key Features of WILSONPRO 4000R:
1. Easy rack-mounted installation.
2. Color LCD Screen.
3. Highest Downlink and Uplink Power.
4. Extended Dynamic Range (XDR).
Enterprise Cellular Connectivity with New WilsonPro 4000R!
The WilsonPro 4000R is the first rack mounted, cell booster to incorporate four separate signal amplifiers feeding multiple indoor antennas.
Designed to provide enhanced in-building cellular coverage for all commercial spaces, including hospitals, hotels, warehouses and offices, the WilsonPro 4000R amplifies weak cell signals to provide reliable voice and data coverage including 4G to inside spaces where signals may not penetrate.
Like all WilsonPro cellular signal boosters, the WilsonPro 4000R features cell site protections that auto-detect and prevent any cell tower interference.
Wilson Electronics quality and an industry-leading three-year warranty make the 4000R a clear choice for the professional technology integrator.
WilsonPro 4000R Features In Detail:
Wilson 4000R literally delivers the power of four boosters in a single rack mount unit, and provides cell coverage for up to 100,000 square feet of indoor space, or even more depending on the strength of the incoming signal from the tower.
Easy rack-mounted installation:
The 4000R is intended to fit into an existing server rack. This design allows for a neat and clean installation while leaving the unit easily accessible.
Onboard Software for Better Control:
Each indoor antenna path is independently and automatically controlled with onboard software, ensuring great connectivity throughout large spaces and multi-story buildings. Since all ports are independently controlled, each can adjust its gain level up or down as required by the conditions of the immediate signal environment without disrupting coverage from any other zone.
Extended Dynamic Range for Continuous Connectivity:
Gives the 4000R the greatest tolerance of any competing booster for a strong incoming signal from the tower. XDR allows the booster to never shutdown due to too strong of a signal. No matter how strong, the booster will never overpower and shutdown.
Color LCD for Easier Access:
Unlike other boosters, the WilsonPro 4000R has a color LCD screen with four-way navigation, allowing integrators to have easy and effective control of the product.
WilsonPro 4000R Specs
Product Number: U460231.
Antenna Impedance: 50 Ohms.
Power Requirements: 110 - 240 V AC, 50 - 60 Hz, 30 W.
Model Number: 460231.
Noise Figure: 5 dB nominal.
Frequency: 698-716 MHz, 729-787 MHz, 824-894 MHz, 1850-1990 MHz, 1710-1755 MHz, 2110-2155 MHz.
Isolation: > 90 dB.
Maximum Uplink Power: 30 dBm.
Maximum downlink Power (per port): 17 dBm.
Maximum Gain: 70 dB.
|For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.|
Regarding weBoost, Wilson Pro, and zBoost Amplifiers:
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.
In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.
Please type your cell phone model in the search box at the top to view all available accessories for your phone model
Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.
Copyright Cell-Phone-Accessories.com | HTML Index