WilsonPro 70 Plus Cell Phone Signal Booster Kit (75 Ohm)
|For persons in areas prone to reduced call quality, dead zones, and dropped calls, this may be as a result of poor coverage, or too much interference from signal blockers such as cement and steel. Luckily, if you are able to find at least one bar of signal in any given area, the Wilson Pro 70 Plus (75 Ohm) Signal Booster Kit may be able to increase this to five. The second most affordable in Wilson's line of Plus signal boosters, the 70 Plus (50 Ohm) provides 70 dB of signal gain for an area of up to 50,000 square feet, by gathering signals from the nearest cellular tower belonging to your network provider and distributing it in the coverage area. Depending on the quality of the incoming signal, the signal gain levels may fluctuate.|
Sophisticated built-in technology provides the Pro 70 Plus (75 Ohm) with several features that lessen installation and maintenance time. Once the signal booster has been set up by your installer and registered with your network provider, it automatically adjusts its settings for optimal performance. There is no need for configuration. It boosts signals on all 2G voice, 3G voice and data, and 4G LTE voice and data carrier networks in the United States and Canada, meets standards set by both the Federal Communications Commission and Industry Canada, and is currently the most powerful booster approved by the FCC. It can be installed both on the inside and the outside of a building depending on where signal is strongest.
Wilson's Pro 70 Plus (75 Ohm) professional signal booster kit comes with a Wilson Amplifier, Wide Band Directional Antenna, Dual Band Panel Antenna, Lightning Surge Protector, 2 feet Low-Loss RG11 Cable, 50 feet Low-Loss RG11 Cable, 75 feet Low-Loss RG11 Cable, and 120 volts Alternate Current Power Supply. It also has a commercial expansion kit available for persons looking to increase their setup or upgrade from a lesser installation.
The Pro 70 Plus (75 Ohm) can work in areas with signals of up to +10 dB before automatically shutting down; perfect for persons in high signal traffic areas like cities. It has high uplink and downlink power which means a capacity for increased range, and does not interfere with signals from cell towers or other devices. Information is also easily viewed on the graphical display.
This industrial-like heavy-duty Wilson Electronics cell phone signal booster kit is fully compatible with following United States and Canadian service carriers and providers on their respective Voice, 3G, 4G, LTE Advanced and Plus highest speed networks:
- AT&T Wireless
- Bell Mobility
- Boost Mobile
- C Spire
- Cricket Wireless
- Ice Wireless
- Metro PCS
- Koodo Mobile
- Simple Mobile
- Straight Talk
- Public Mobile
- T-Mobile USA
- Rogers Wireless
- Telus Mobility
- US Cellular
- Verizon Wireless
- Virgin Mobile Canada
- Virgin Mobile USA
- Wind Mobile
|For weBoost Wilson Amplifier Buyers: Please note that amplifier part numbers which begin with "47" or "46" can be installed anywhere within USA and worldwide, whereas amplifier part numbers which do not begin with "46" or "47" are only available for installation outside United States of America. If purchasing part numbers which do not begin with "46 or 47" to be shipped within USA but for use outside USA, please complete and fax Legacy Cell Phone Signal Booster Customer Statement right after placing such an order. Thank you.|
Regarding weBoost, Wilson Pro, and zBoost Amplifiers:
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint plus more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.
In order to help our valuable customers, we have compiled a list of most major wireless service provider's signal booster registries so you can easily register your existing or new cell phone signal booster after placing an order for it at our website. weBoost, WilsonPro, and zBoost are Wilson Electronics companies.
Please type your cell phone model in the search box at the top to view all available accessories for your phone model
Found Lower Purchase Price Elsewhere (Excluding Wilson Electronics Products)? Simply email and/or fax, Low Price Guarantee form if you find accessories or related supplies for less (excluding Wilson Products) and await our response during business hours to see whether we can match or offer a new lower cost. Competing retail suppliers or online stores must be located in USA or Canada. See product supply price guarantee form for details.
Copyright Cell-Phone-Accessories.com | HTML Index